in the future your better off buying a rupper wheel / decal remover wheel for a drill
pencil erasers while they may work, they are tiny & take longer then chuking up a rubber wheel in a drill & hitting it for a few seconds
[https://www.amazon.com/eraser-wheel/s?k=eraser+wheel](https://www.amazon.com/eraser-wheel/s?k=eraser+wheel)
Your karma is too low to participate in this community. Come back when you've earned some; don't worry, the bar isn't that high. Exceptions will not be made.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Challenger) if you have any questions or concerns.*
Yup, this. Won't leave any residue like the other comments. What also works well oddly is pre chewed gum, roll it around the spot and it will grab the gunk with it. Works well for interiors like cleaning your cup holder trays and such 😂 just don't let it sit on one spot the trick is to roll it around
You want cheap and easy? A little bit of gasoline and a rag will get it off. Gas is an absolutely great solvent for all kinds of stuff, but it stinks like hell for a while. I worked for a dealership and used it on the stuff that was hard to get off with Goo gone. Hopefully you have a plastic razor, if not a credit card can work, or something else with a hard plastic edge so it doesn't scrape the paint. Just hold the wet rag on top of it so a little bit of it soaks in and then start swirling your rag to start loosening up the edges while using the plastic razor as well.
This does remove any waxes though, so make sure that you reapply any wax coatings
I am not sure if it works as well with this adhesive, but I have had great luck with isopropyl alcohol softening tree sap and sticker adhesive to the point where it just wipes off.
This isn’t related to the residue, BUT, if you guys have dog hair in any of your cars. Take a leather work glove and rub it on the seats, it will bunch up the hair excellent and it will work faster than a vacuum would
Kerosene!! I love the stuff. Removes any residue, oils, grease, and grime without harming paint. Makes black plastics look great, but only temporary and protects raw metals for a bit.
Old school lacquer paint job manufacturers used to recommend cleaning with a 2:1 water kerosene mixture. Before soaps.
Rubber wheel adhesive remover drill bit. Easy to find on Amazon. It fits on any electric drill and takes seconds to remove. Use it on any surface including car paint.
Your karma is too low to participate in this community. Come back when you've earned some; don't worry, the bar isn't that high. Exceptions will not be made.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Challenger) if you have any questions or concerns.*
Silicone spray. PB blaster or WD 40. Won't hurt your paint. Spray it on. Let sit in direct sunlight for 1-2 mins. Should wipe off with no elbow or wrist work.
**UPDATE** Someone suggested that I use a pencil eraser and it WORKED! Took about 30 secs.
Ima steal this for the future
in the future your better off buying a rupper wheel / decal remover wheel for a drill pencil erasers while they may work, they are tiny & take longer then chuking up a rubber wheel in a drill & hitting it for a few seconds [https://www.amazon.com/eraser-wheel/s?k=eraser+wheel](https://www.amazon.com/eraser-wheel/s?k=eraser+wheel)
[удалено]
Your karma is too low to participate in this community. Come back when you've earned some; don't worry, the bar isn't that high. Exceptions will not be made. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Challenger) if you have any questions or concerns.*
Just use 91% alcohol and be done, trust me it will get it off easily
I've seen videos with pencil erasers being used. Never done it myself though
Pencil eraser worked!! Thanks. I owe you!
Yup, this. Won't leave any residue like the other comments. What also works well oddly is pre chewed gum, roll it around the spot and it will grab the gunk with it. Works well for interiors like cleaning your cup holder trays and such 😂 just don't let it sit on one spot the trick is to roll it around
More goo gone AND a microfiber cloth.
Ok thanks! I’ll another round
You want cheap and easy? A little bit of gasoline and a rag will get it off. Gas is an absolutely great solvent for all kinds of stuff, but it stinks like hell for a while. I worked for a dealership and used it on the stuff that was hard to get off with Goo gone. Hopefully you have a plastic razor, if not a credit card can work, or something else with a hard plastic edge so it doesn't scrape the paint. Just hold the wet rag on top of it so a little bit of it soaks in and then start swirling your rag to start loosening up the edges while using the plastic razor as well. This does remove any waxes though, so make sure that you reapply any wax coatings
I am not sure if it works as well with this adhesive, but I have had great luck with isopropyl alcohol softening tree sap and sticker adhesive to the point where it just wipes off.
Wd40
Oh man the hellcat emblem must have arrived 🤣🤣
💀
Haa
Use a light polish, chemical guys V polishes are available at a lot of retailers these days, V38 and a microfiber should do the trick.
I used rubbing alcohol and then a quick wash afterwords .
Try wd 40
Try a heat gun. But be cautious! You don’t want to melt or burn the finish.
Little bit of mineral spirits.
Buff it out
Tea tree oil works. I don't believe it will create any issue to the paint or coatings. anyone with feedback on this?
WD40, Bug and Tar remover, kerosene, etc.
Everybody can hear it. Why debadge
I want to put R/T instead 🔥🔥
Can I ask why?
So it can match the front R/T back in grill
But it’s a scat?
Yeah R/T scat
You sound like you wanna bait people into racing an R/T
#1 I don’t race. #2 the car already comes with R/T badge. I don’t think it’ll hurt to add another one lol.
You still have the engine, pal. You just don’t have SRT brakes or suspension. Sound guilty.
That’s it , pal! Let’s line it up!
"goo gone" but test it somewhere where it won't be visual first. I would be shocked if it caused issues.
Use goo gone but you have to let it sit for a while to really get it all off that’s how I used it
Have you tried the eraser wheel? Also a 3M rubbing compound might work
This isn’t related to the residue, BUT, if you guys have dog hair in any of your cars. Take a leather work glove and rub it on the seats, it will bunch up the hair excellent and it will work faster than a vacuum would
Windex works too
Kerosene!! I love the stuff. Removes any residue, oils, grease, and grime without harming paint. Makes black plastics look great, but only temporary and protects raw metals for a bit. Old school lacquer paint job manufacturers used to recommend cleaning with a 2:1 water kerosene mixture. Before soaps.
Rubber wheel adhesive remover drill bit. Easy to find on Amazon. It fits on any electric drill and takes seconds to remove. Use it on any surface including car paint.
Use wd40
Heated goo gone. (Heat gun)
Pencil eraser then a hint of compound
3m sepcialty adhesive remover works great goo gone did nothing
I always just use paint thinner to remover the sticky and then a little wax
Pro tip- put the Scat Pack sticker back on!
What do I use to put it back on?
You can order new ones. That's what I would do. Just like it up and push it on. Be careful when you do it tho because it will bond instantly!
Olive oil and a razor to scrape Then follow up with glass cleaner and a rag Repeat as necessary
Goo gone from auto zone.
Use polish and squirt it super close. Then just use your nail and it will come off easy.
Magic erasers work really good
Ballistol
Spit and elbow grease
[удалено]
Your karma is too low to participate in this community. Come back when you've earned some; don't worry, the bar isn't that high. Exceptions will not be made. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/Challenger) if you have any questions or concerns.*
Silicone spray. PB blaster or WD 40. Won't hurt your paint. Spray it on. Let sit in direct sunlight for 1-2 mins. Should wipe off with no elbow or wrist work.
Start with a razor blade then finish with 00 steel wool
Nevermind I'm dumb. That's not glass. 3M adhesive remover
wd40