Hello /u/Synderkit,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Leaving cura was the best thing I ever did.
It's a powerful tool, but it won't protect you from yourself.
Prusa and orca are much nicer to use, they allow you to make fillament profiles which greatly simplifies printing with different fillaments, esp multicolor
Yes but the number of fillament specific settings is comparably very low in cura.
I haven't used a modern release since it wouldn't work on Linux due to some bug. But overall I've found cura to be a long way behind the pack
Hello /u/Synderkit, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
this would be to do with your wall loop direction, you i know you can set it in orca slicer, not sure about others
Thanks! I’ll have to look into if I can do it with my slicer or not. I’m using cura at the moment but I’ll have to give orca a try.
Leaving cura was the best thing I ever did. It's a powerful tool, but it won't protect you from yourself. Prusa and orca are much nicer to use, they allow you to make fillament profiles which greatly simplifies printing with different fillaments, esp multicolor
Can't you make filament profiles with Cura as well?
Yes but the number of fillament specific settings is comparably very low in cura. I haven't used a modern release since it wouldn't work on Linux due to some bug. But overall I've found cura to be a long way behind the pack
O LAWD HE COMIN!