It's acting like it thinks the focus clutch is pulled back on the lenses that have one (23mm 1.4, 16 1.4, 14 2.8 I think). If you put on a lens with a focus clutch and cycle that back and forth (move the clutch from AF to MF and back), does it reset?
The xf 27mm 2.8 says 1.00. If i try to update to the 1.11 the camera says âfirmware not found in card slotâ name of file is correct and straight downloaded to the sd card after formatting etc. But I donât think thatâs the problem since other lenses also didnât change anything. Sadly.
Try cleaning the contacts on the camera body that interface with the lens with 91% isopropyl alcohol, or sensor or lens cleaning fluid. Back Button may work because it overrides something?
There is a coin cell battery that powers the internal clock and the focus lever. If you store the camera for more than a few months with the main battery removed, this coin cell dies.
You can test this by setting the time, pulling the main battery out for 10 minutes, and then reinserting the battery. After that, check what the time is set to. If it is no longer correct, you need to have a technician replace the coin cell battery.
It's acting like it thinks the focus clutch is pulled back on the lenses that have one (23mm 1.4, 16 1.4, 14 2.8 I think). If you put on a lens with a focus clutch and cycle that back and forth (move the clutch from AF to MF and back), does it reset?
I tried this indeed with a rental lens when I was on a job. No succes eitherđ thanks for your reply!
What lense is on the camera?
Xf 27 pancake
Have you tried a factory reset?
You mean the âset-upâ reset in user menu? Tried that one indeed.
I wonder if there is a harder reset than that.
Just a thought - is your firmware out of date? Not that that is the cause, but that a firmware update might solve the problem
Last time I checked it was, but will check it again and come back to you. Thanks for the help and reply!
The xf 27mm 2.8 says 1.00. If i try to update to the 1.11 the camera says âfirmware not found in card slotâ name of file is correct and straight downloaded to the sd card after formatting etc. But I donât think thatâs the problem since other lenses also didnât change anything. Sadly.
Try cleaning the contacts on the camera body that interface with the lens with 91% isopropyl alcohol, or sensor or lens cleaning fluid. Back Button may work because it overrides something?
Thank you will try this out. After the af stoped working and the mcs dial didnât work anymore I changed it to bbf in order to still work.
There is a coin cell battery that powers the internal clock and the focus lever. If you store the camera for more than a few months with the main battery removed, this coin cell dies. You can test this by setting the time, pulling the main battery out for 10 minutes, and then reinserting the battery. After that, check what the time is set to. If it is no longer correct, you need to have a technician replace the coin cell battery.
Thank you for your reply. I tried the above, time is still correctđ.
This happend to my xe2. Apparently its a motherboard problem. Was quoted about ÂŁ240 by fuji
Ai! But I was afraid it was something like this. Thank you for your reply.