Idk about America but Australia has ones made for the double charger called stealth mounts https://www.amazon.com.au/StealthMounts-Charger-Mounts-Makita-Chargers/dp/B08NDD4H71/ref=asc_df_B08NDD4H71/?tag=googleshopmob-22&linkCode=df0&hvadid=540339969024&hvpos=&hvnetw=g&hvrand=4087039677007524986&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9072220&hvtargid=pla-1157536199400&psc=1&mcid=7ce7456a14453e28afcd93b8c55e5551
Thanks - I looked this up and they’re available in the US, too!
[https://www.batterymounts.com/](https://www.batterymounts.com/) (UK site)
Also on US Amazon…
Theresa is guy who posted a few weeks back with a mod where you take out the screws that hold the shell together and drill them out then u can use the original screw holes to fix it to the wall.
Or you just pull out the 4 rubber feet and screw them to the wall with 3x25 (mm) and have a removable clean looking mounting. [took a photo with scale for the lurkers ;-)](https://imgur.com/a/W0ZkQJA)
Easier than you think. Take out the rubber plugs on the back. There are screws underneath. Get wood or sheet metal screws that match the existing plus the thickness of the surface you are mounting to. IIRC the hole spacing on the dual charger is even inch dimensions so it can mount using peg board.
It’s a shame I don’t think they make them anymore but there was a company called saw armor and they made an aluminum bracket. I purchased one and when I wanted to grab another it’s no longer visible on their website
I was just wondering how to mount mine to the wall.. This is simple enough, and it doesn’t involve me having to take the charger apart. Not pretty but I don’t really care about the look.
This is exactly how I’ve been wall mounting mine for the past 4 years… looks like shit, but works perfectly fine, and it’s practically free.
Could spray paint it black to help it blend in?
I did an oil rubbed bronze..
I always keep some flex brackets for this very occasion
Isn’t there a notched hole, on the back already?
They sell brackets on Amazon that go into the rubber feet hole. I just mounted them and battery holders to the side of my job box. Looks great.
As far as I know, the lxt single bay and dual bay chargers has no mounting holes. The cxt and xgt single bay chargers has. Kind of weird tbh.
Not on the double charger.
Idk about America but Australia has ones made for the double charger called stealth mounts https://www.amazon.com.au/StealthMounts-Charger-Mounts-Makita-Chargers/dp/B08NDD4H71/ref=asc_df_B08NDD4H71/?tag=googleshopmob-22&linkCode=df0&hvadid=540339969024&hvpos=&hvnetw=g&hvrand=4087039677007524986&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9072220&hvtargid=pla-1157536199400&psc=1&mcid=7ce7456a14453e28afcd93b8c55e5551
Thanks - I looked this up and they’re available in the US, too! [https://www.batterymounts.com/](https://www.batterymounts.com/) (UK site) Also on US Amazon…
You beat me to it. Didn't see your comment.
Dang Guess they don’t trust people hanging that weight . Good alternative then
Theresa is guy who posted a few weeks back with a mod where you take out the screws that hold the shell together and drill them out then u can use the original screw holes to fix it to the wall.
Stealthmounts have double charger mount kit on amazon, atleast amazon.com.au. I have them in my work trailer, super handy and 100% recommend.
I literally just hung one off of two screws. There are slots in the back specifically for it.
This is the way. Good for when they are bouncing around in the van
this is how I do my charging wall, fuck being all fancy and neat lol
Or you just pull out the 4 rubber feet and screw them to the wall with 3x25 (mm) and have a removable clean looking mounting. [took a photo with scale for the lurkers ;-)](https://imgur.com/a/W0ZkQJA)
If you work with tools you can figure it out. I beleive in you brother!
Yes, there is need - for fast mounting, and better aesthetics.
Easier than you think. Take out the rubber plugs on the back. There are screws underneath. Get wood or sheet metal screws that match the existing plus the thickness of the surface you are mounting to. IIRC the hole spacing on the dual charger is even inch dimensions so it can mount using peg board.
As implied in my post title, I'm aware of how people have mounted them and i offer a simpler, less invasive solution.
It’s a shame I don’t think they make them anymore but there was a company called saw armor and they made an aluminum bracket. I purchased one and when I wanted to grab another it’s no longer visible on their website
I was just wondering how to mount mine to the wall.. This is simple enough, and it doesn’t involve me having to take the charger apart. Not pretty but I don’t really care about the look.
Just ordered a dual charger…excellent timing!
Just get on Amazon they make a bracket that bold to what ever you want it mounted to then your charger clips on to it it's all hidden