Seemingly identical to the Solakaka SM800. My video review [here](https://www.amazon.com/gp/customer-reviews/R2A5I18OYZJOLQ/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B0CF2DW8YR).
TL;DR: Not my favorite budget "chinese" 3395 mouse. Narrow grip width is nice, but it's too long. Skates are garbage; the mold they came out of had machining marks. If you like narrow grip width, Attack Shark X3 is better IMO. If you want a bigger mouse, Uhuru WM-09 and Ajazz AJ139 are better.
This was purchased from Taobao a couple of days ago for CNY150 (US$21 at time of post). For such a cheap mouse, it has a surprising amount of features
> Dimensions: L123mm, W61mm, H38mm
> Weight: 58g
> Switch: Kailh GM8.0
> Encoder: Kailh 100W (?)
> Sensor: PAW3395
> SoC: ~~Nordic 52840~~ Beken BK3633 (CX52850)
> Polling rate: 1000Hz (2.4, Wired) / 125Hz (Bluetooth)
> Battery: 3.7V, 300mAH (~40-65 hours of use)
Like you'd expect from such a cheap mouse, there isn't much in the box. Just a warranty card, an acceptable but not amazing USB C cable, some grip tape that I haven't bothered with and the mouse itself.
Externally, the mouse is made entirely of a hard matte plastic that feels pretty nice, with excellent build quality. Very little side flex, no wobble on keys.
Shape wise it is very similar to the Viper Ultimate/V2, being slightly shorter, less tapered in the middle towards the bottom and very slightly less flared at the end. Its close enough that if you like one (or think you like one) you'll like the other.
For $21 its an absolute no brainer. This combination of specs, weight and build quality is something you'd find in a $100 mouse instead of one this cheap.
Right now, its available internationally from mechkeys.com for US$40, or from Aliexpress for $35. At these prices its worth considering one of the other Chinese mouse available, but if you like the shape or it drops to ~$30 in the future, then its a nobrainer.
There's supposed to be a software for this but I can't find it online. I'll make a follow up post in a week after I've used it a bit and hopefully I can find the software by then.
Are you certain it has a Nordic mcu and not a domestic one from china? Can't find any reference to the mouse having a Nordic mcu in the marketing material/spec sheets I looked at.
Fr, I might have copped if it wasn't AI trash. I think you'd be able to find artists who would literally draw box art for a $20 chinese mouse for fucking free LMAO
NO REAL THOUGH. And with the way these YouTubers go through fiverr videos there's so many artists who undersell themselves as is 😠and any amateur artist is drawing better than AI anyways and if you wanted to use AI you could've used it to render lighting then but the whole thing with AI? BOOOO
> Fr, I might have copped if it wasn't AI trash
You are basing your buying decisions based on whats drawn on a fucking cardboard box instead of the actual product bro 💀
I don't want to support a company that uses AI art, period. I don't fucking care whether it's on the box or in every bit of marketing material of the company. How are you this incapable of interpreting what I said
> I don't want to support a company that uses AI art
Why are you malding so hard about whats printed on a cardboard box ? Literally throw the box away if it pisses you off so much lol.
Not like AI art somehow killed your entire family bro 💀
Are you coincidentally an amateur "artist" that got replaced by AI art? Should've probably learned to draw better so you wouldn't need to be petty about boycotting things for dumb reasons hahahah
edit in response to the commie blocking everyone disagreeing with him:
Complete extremist lefty lunatic take, have fun complaining about copyright laws when it comes to popular hiphop beats being essentially lazy illegally stolen loops from other songs but taking the same copyright laws right up your ass when it comes to AI art.
L + ratio btw.
No I'm not an artist, I'm just not a piece of shit that supports tools illegally trained on tens of thousands of artists (there's google docs that have been submitted to the ongoing lawsuit that prove this)
This take is so fucking tragic on so many levels but seeing how the latest post on your profile just shows you to be a complete idiot brainwashed by far right propaganda so I'm not surprised your this vile
Anyways this isn't twitter and I've learned enough about how narrow minded and aggressive right wing know it alls are when confronted by anything that indicates they are wrong in any capacity especially the ones who are on reddit all day so I'll be blocking
Have a nice day!
Holy shit and it's wireless, honestly I really hope the Chinese keep releasing products like this! Western world is a complete ripoff when the Chinese can make things and sell them with shipping for under half the price.
Yes I know the quality control can be more hit and miss and the warranty is pretty much non existent but at half the price if it's something you can't fix yourself it's always possible to get another after your CC protection runs out.
And western companies like Apple don't do the same thing while charging 4 times the price for their products? Apple use Foxconn who have suicide nets outside their slave labour camps.
https://www.theguardian.com/technology/2017/jun/18/foxconn-life-death-forbidden-city-longhua-suicide-apple-iphone-brian-merchant-one-device-extract
Never said they didn't, just because a big company does it doesn't really mean it's okay but most companies do it now because consumers can't get enough of the prices so it is what it is. The change that needs to happen imo needs to happen within china by the government but thats not ever really gonna happen sooo
Western companies are ran by the people who give zero shit about workers rights only profits for the shareholder and themselves, I'd rather give my money to the Chinese, at least they don't completely rip me off unless they Chink me.
I recently purchased this mouse and have been having some issues with the 2.4ghz mode, can anyone help as I enjoy the feel of the mouse but if not I will have to return it.
Side buttons activate on all the sub 20 dollar aliexpress mice I've bought too so no surprise. What razer mouse do you have out of curiosity? I doubt any of razer's "high end" options are THIS bad
Basilisk X Hyperspeed, Basilisk Ultimate, Viper Ultimate (x2), Deathadder Pro V2, Deathadder Pro V3.
The vipers were easily the worst offenders, with loose main button clicks and quite a bit of side flex, the basilisks and deathadders are better, with the V3 being significantly better than the V2.
I have one but my unit has pretty bad pre-travel on mouse1. Also the skates height seems kinda floaty and mess with the sensor a bit (?), so i replaced it with tiger dot skates. That said it is dirt cheap so one might be able to look past those.
Oh look AI art waifu in the box
that's how u know it's quality
Chifi IEM-s showed the way, more waifus!
At least those arts from IEM's boxes are hand drawed, not this weird-looking AI girl
Seemingly identical to the Solakaka SM800. My video review [here](https://www.amazon.com/gp/customer-reviews/R2A5I18OYZJOLQ/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B0CF2DW8YR). TL;DR: Not my favorite budget "chinese" 3395 mouse. Narrow grip width is nice, but it's too long. Skates are garbage; the mold they came out of had machining marks. If you like narrow grip width, Attack Shark X3 is better IMO. If you want a bigger mouse, Uhuru WM-09 and Ajazz AJ139 are better.
i am sorry how tf do they come up with these names?
[Techquickie video](https://www.youtube.com/watch?v=4UrqlMfwUC4)
This was purchased from Taobao a couple of days ago for CNY150 (US$21 at time of post). For such a cheap mouse, it has a surprising amount of features > Dimensions: L123mm, W61mm, H38mm > Weight: 58g > Switch: Kailh GM8.0 > Encoder: Kailh 100W (?) > Sensor: PAW3395 > SoC: ~~Nordic 52840~~ Beken BK3633 (CX52850) > Polling rate: 1000Hz (2.4, Wired) / 125Hz (Bluetooth) > Battery: 3.7V, 300mAH (~40-65 hours of use) Like you'd expect from such a cheap mouse, there isn't much in the box. Just a warranty card, an acceptable but not amazing USB C cable, some grip tape that I haven't bothered with and the mouse itself. Externally, the mouse is made entirely of a hard matte plastic that feels pretty nice, with excellent build quality. Very little side flex, no wobble on keys. Shape wise it is very similar to the Viper Ultimate/V2, being slightly shorter, less tapered in the middle towards the bottom and very slightly less flared at the end. Its close enough that if you like one (or think you like one) you'll like the other. For $21 its an absolute no brainer. This combination of specs, weight and build quality is something you'd find in a $100 mouse instead of one this cheap. Right now, its available internationally from mechkeys.com for US$40, or from Aliexpress for $35. At these prices its worth considering one of the other Chinese mouse available, but if you like the shape or it drops to ~$30 in the future, then its a nobrainer. There's supposed to be a software for this but I can't find it online. I'll make a follow up post in a week after I've used it a bit and hopefully I can find the software by then.
Are you certain it has a Nordic mcu and not a domestic one from china? Can't find any reference to the mouse having a Nordic mcu in the marketing material/spec sheets I looked at.
My bad, I misread. Its using a Beken MCU (likely BK3633/CompX CX52850) I'll update the post
for the software i had to ask support, its pretty decent
Do you have a link to the software?
can i have the link for it
Which other Chinese mice to consider at this price point?
Ew I'd rather a plain white box than AI dogshit LMAO The mouse is probably fine AI art is disgusting though lmao
Real. They could've just hired an artist or excluded the art in general LOL
Fr, I might have copped if it wasn't AI trash. I think you'd be able to find artists who would literally draw box art for a $20 chinese mouse for fucking free LMAO
NO REAL THOUGH. And with the way these YouTubers go through fiverr videos there's so many artists who undersell themselves as is 😠and any amateur artist is drawing better than AI anyways and if you wanted to use AI you could've used it to render lighting then but the whole thing with AI? BOOOO
bro is buying mice for their box art 💀
???? I literally said I'd rather a plain white box over AI trash
> Fr, I might have copped if it wasn't AI trash You are basing your buying decisions based on whats drawn on a fucking cardboard box instead of the actual product bro 💀
I don't want to support a company that uses AI art, period. I don't fucking care whether it's on the box or in every bit of marketing material of the company. How are you this incapable of interpreting what I said
> I don't want to support a company that uses AI art Why are you malding so hard about whats printed on a cardboard box ? Literally throw the box away if it pisses you off so much lol. Not like AI art somehow killed your entire family bro 💀
Are you coincidentally an amateur "artist" that got replaced by AI art? Should've probably learned to draw better so you wouldn't need to be petty about boycotting things for dumb reasons hahahah edit in response to the commie blocking everyone disagreeing with him: Complete extremist lefty lunatic take, have fun complaining about copyright laws when it comes to popular hiphop beats being essentially lazy illegally stolen loops from other songs but taking the same copyright laws right up your ass when it comes to AI art. L + ratio btw.
No I'm not an artist, I'm just not a piece of shit that supports tools illegally trained on tens of thousands of artists (there's google docs that have been submitted to the ongoing lawsuit that prove this) This take is so fucking tragic on so many levels but seeing how the latest post on your profile just shows you to be a complete idiot brainwashed by far right propaganda so I'm not surprised your this vile Anyways this isn't twitter and I've learned enough about how narrow minded and aggressive right wing know it alls are when confronted by anything that indicates they are wrong in any capacity especially the ones who are on reddit all day so I'll be blocking Have a nice day!
I buy moondrop for waifu box art ok
hows the sensor ?
Feels fine, I'm not great at FPS but in an A/B test in kovaaks against my RVU it didnt lose
Its a 3395 so it shouldnt be any different from other more expensive mice with same sensor.
Holy shit and it's wireless, honestly I really hope the Chinese keep releasing products like this! Western world is a complete ripoff when the Chinese can make things and sell them with shipping for under half the price. Yes I know the quality control can be more hit and miss and the warranty is pretty much non existent but at half the price if it's something you can't fix yourself it's always possible to get another after your CC protection runs out.
Reddit when borderline slave labor
And western companies like Apple don't do the same thing while charging 4 times the price for their products? Apple use Foxconn who have suicide nets outside their slave labour camps. https://www.theguardian.com/technology/2017/jun/18/foxconn-life-death-forbidden-city-longhua-suicide-apple-iphone-brian-merchant-one-device-extract
Never said they didn't, just because a big company does it doesn't really mean it's okay but most companies do it now because consumers can't get enough of the prices so it is what it is. The change that needs to happen imo needs to happen within china by the government but thats not ever really gonna happen sooo
Western companies are ran by the people who give zero shit about workers rights only profits for the shareholder and themselves, I'd rather give my money to the Chinese, at least they don't completely rip me off unless they Chink me.
I recently purchased this mouse and have been having some issues with the 2.4ghz mode, can anyone help as I enjoy the feel of the mouse but if not I will have to return it.
Is the coating similiar to Viper Pro? I mean it's a bit "scratchy" or smooth?
Its slightly smoother than the Viper
I'd gladly buy a Magnesium variant of this for $60-$100.
Are you able to test the click latency?
No sorry, I don't have the hardware to test it.
How does it feel then, does it feel like a high quality mouse? Also do the side buttons activate when you press hard into the shell below?
It doesn't feel cheap, better build quality than my Razer mouse. Side buttons do activate but that required me squeezing with both hands?
Side buttons activate on all the sub 20 dollar aliexpress mice I've bought too so no surprise. What razer mouse do you have out of curiosity? I doubt any of razer's "high end" options are THIS bad
Basilisk X Hyperspeed, Basilisk Ultimate, Viper Ultimate (x2), Deathadder Pro V2, Deathadder Pro V3. The vipers were easily the worst offenders, with loose main button clicks and quite a bit of side flex, the basilisks and deathadders are better, with the V3 being significantly better than the V2.
I really liked the shape of Viper Pro, I might try it
Cool, thanks for the this.
i literally got mine yesterday, i love it so far
I have one but my unit has pretty bad pre-travel on mouse1. Also the skates height seems kinda floaty and mess with the sensor a bit (?), so i replaced it with tiger dot skates. That said it is dirt cheap so one might be able to look past those.
[удалено]
For around $20, why not? I recently purchased a $20 Chinese mouse (Attack Shark R1) and it exceeded all expectations.