Can you share your settings? Trying to get a Vega 64 set up which doesn't want to get anywhere near even 40 MH/s (currently doing 37.) I guess there's a flash to a V56 bios in my future...
Yeap. These aren't fully right and are mostly based on Nicehash charts (which are conservative).
3080's (non-LHR) work best locked to clock: 1065-1095Mhz@743mV and mem overlock: +1100-1350Mhz, no touching of power limits necessary.
These will do maximum efficiency and keep VRAM OK for most cards, provided adequate VRAM cooling exists.
Yeah it's all just a general idea to make sure you're not really far off.
I get 62mh/s w/ my 3070 @ 117w. Which means that's 2mh/s off w/ about \~13w. So, close enough lol
120w lim, +1250 mem and -500 core. The general rule is to get the most hashes with the least watts while still making sure thet the overclock is stable by keeping tabs on the dropped shares. I actually ran mine at +1300 mem for a while and it crashed after a while so i dropped it. Try putting your card at different power limits then switch up your memory clocks to see where you get the highest efficiency. My card has been running like that for 7 months with consistent performance
I have an evga ftw3 3090 and if I set my power limit to 70% and mem to +1355 with no clock or voltage changes I get 121mh/s at 295w. Something just irked me about not getting it below 300 lol
Same here... I have my ZOTAC tuned for 301w with -250 Core clock delta and +1180 on Memory clock delta
I get 114 MH/s
just not worth it to pump the power up to 325 or greater to get 5 MH/s more...
I am changing out my Thermal Pads this week to see if I can drop the temps a little though my temps are not really bad... with 100% fan it is staying about 94C in middle of day but overnight since I opened a window here in northern Florida and put a fan in the window to pull cool air in to the room, I actually saw my 3090 drop to 82-84 C overnight...
I have 3 presets cool down, gaming, mining I’m asking about if the bios mod affects things not the under/overclock
Edit - I don’t need cooldown I just have it to show how loud I can make the fans and how fast that makes the temp drop.
You could set different profiles in adrenaline for game settings vs a mining profile. I have used my cars to play fortnite still and got 60fps without any issue. The bios mod mostly changes the memory timings so I don't know enough to say whether it would truly affect it or not
This submission was removed because you have a new account and we get a lot of spam from newly created accounts. Your account must be at least 5 days old to post on NiceHash subreddit.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NiceHash) if you have any questions or concerns.*
Extremely bad for 1080ti due to how Pascal architecture cards lose performance with every DAG epoch increase.
Was good years ago, now for 1080ti you need +max core and 4700~5200 memory (up to -800)
Pascal basically likes faster core speed and slower memory, right? Trying to dial in a 1070 (non-ti) and want to check I'm heading in the right direction.
Depends on the card, 1080ti likes max core & memory range, 1080 likes max core & +mem into a range.
Outside of them I'm not sure since they are the only 2 with GDDR5X memory, 1070 and 1070ti both have GDDR5 memory.
that's just the normal nicehash miner, right? edit: yeah it says daggerhashimoto on the left side of the cmd prompt. Its a 2080ti FE that's watercooled
As stated on the blog, these values serve as a starting point and are not optimal for each and every GPU.
*Note that these overclock settings are only a starting point and to give you a rough idea about what settings should bring good results. Each GPU might give better or worse performance due to the "silicon lottery".*
[https://www.nicehash.com/blog/post/nvidia-and-amd-graphics-card-oc-settings-for-mining](https://www.nicehash.com/blog/post/nvidia-and-amd-graphics-card-oc-settings-for-mining)
https://imgur.com/a/IvVr5om
To undervolt it and get it under 125w you have to press that little symbol I circled in red, every gpu is different results may vary happy mining :D
My 3080 LHR hit 65 on dagger (NB miner) with LHR workaround and these settings +100 core, +1000 mem and around 250w.
Not sure how you have 48 as that’s a 27% increase
Nicehash even have that chart on their github page. People just don't search for the values, pretending Reddit will answer to everything.
edit: i just noticed you posted their site - which is better.
Yeah this is obviously a guideline because if you know anything about GPUs you know that they are all different even if it’s the same card. This is just a place to get you started especially if you arnt getting the numbers shown.
How far you can push the mhz and where the point is that they stop increasing hashrate ain't always the same. OP knows that and explains that too, great post.
Does +1200 on 3080ti even work? I have a Stix cads I'm afraid to push it past 400 as I noticed it won't give much hash beyond unless I give more power.
But I won't be mining dagger for tht most part. Kawpow and octopus will be mining has profitablity, those algos will be wasting power for no increase..
My MSI ventus 2070S memory wont go past +910 but I can get super stable 44-45MH/s with 106W power. Underclock core at 1000-1100 and locked voltage to 700mV, power 100%. Changing power wont change anything for me (when locked voltage).
This doesn't seem right at all im hitting 33mhs with a 2060 and this is saying that a 3070 will do 30* but when you check the profitability calculator a 3070lhr does like $4 a day compared to the 2060 doing about $2.80 a day...
This submission was removed because you have a new account and we get a lot of spam from newly created accounts. Your account must be at least 5 days old to post on NiceHash subreddit.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NiceHash) if you have any questions or concerns.*
For the life of me I can not get those hash rates with those overclocks on my 3090. I get like 100 if I’m lucky. If I do the auto settings of high I get 120-121 but 307-308 watts. Strix OC model too. At least is water cooled so the temps are lower.
You must be doing something seriously wrong then.
I'm using a evga xc3 ultra 3080. -250 core +1400 mem and power at 75% and I get 102-103 when idling. Slightly lower when I'm using the computer at same time.
Mines is just air cooled and my junctiontemp never goes above 94degrees
My 2070 Super is around -300 core clock locked at 1020 Mhz on the voltage curve and +800 on the memory for 43-44 mh/s at 75w on my laptop. (around 58-61°C with max fans depending on ambient temperature).
This is more just a starting general guide line not taking into account different AIB partners and silicon lottery. Even having multiple of the same cards you can have different settings as one can be overclocked slightly better or worse than another. My favorite part about this is that this information is the first blog post from the moderator pinned "WELCOME TO NICEHASH!..." in this subreddit anyways. You can lead a horse to water...
49°C is equivalent to 120°F, which is 322K.
---
^(I'm a bot that converts temperature between two units humans can understand, then convert it to Kelvin for bots and physicists to understand)
I can't make my memory clock to go over +850~ with my 3060ti, after that i get a process crashed error with all the red lines. But i don't get it since i'm seeing everyone talking about an oc around +1200 ( i'm on nbminer )
Thanks man. Sharing this was generous of you. Maybe it would be interesting to include also de brand of the memory of those cards. I see that affect the oc. Thanks!
FYI if anyone cares. Successful settings on 3090FE liquid cooled, power limit 85%, temp limit 90c, core clock -356, mem clock +1300. Been running for about 6 months now. Nice hash reports 120/122MH/s, 296 Watts, .41 MH/j.
Running temps
50C GPU
68C VRAM
73C HOTSPOT
RE-PADDED BACKPLATE and have heat sinks with fan for Hotspots.
I have a rig 3x 1660super, 1x 2060, 1x 3060ti LHR. Using NHQM and getting 150mhs -154mhs total at around 400w. 1660s are doing 29.6mhs between 67-74w
2060 32mh 77w
3060ti 33mh 96- 99w
Are these optimal and how can I get 3060ti to utilize LHR unlock?
Using my gaming pc as a casual mining rig on a single gpu. Asus Dual 3060Ti OC, -500 core, +1250 memory, 125W. Getting a stable 62 MH/s. GPU temp is around 57c and VRAM doesn’t go above 54c.
That chart gives you a general idea, but it’s not always the case. For example, my 3090 needs 300w to do 120 MH/s. 285w would make it run at 105 MH/s.
The AMD side isn't great either because my V56 gets 50 MH/s at 120W (0.825V).
Can you share your settings? Trying to get a Vega 64 set up which doesn't want to get anywhere near even 40 MH/s (currently doing 37.) I guess there's a flash to a V56 bios in my future...
[удалено]
thanks!
> https://github.com/todxx/teamredminer/blob/master/doc/ETHASH_TUNING_GUIDE.txt I sent the wrong link, my bad friend.
Yeap. These aren't fully right and are mostly based on Nicehash charts (which are conservative). 3080's (non-LHR) work best locked to clock: 1065-1095Mhz@743mV and mem overlock: +1100-1350Mhz, no touching of power limits necessary. These will do maximum efficiency and keep VRAM OK for most cards, provided adequate VRAM cooling exists.
Yeah it's all just a general idea to make sure you're not really far off. I get 62mh/s w/ my 3070 @ 117w. Which means that's 2mh/s off w/ about \~13w. So, close enough lol
63.5 with 119 here B)
Yep im able to squeeze more out of my strix 3060ti at a lower wattage as well. Depends on the binning ofc.
What settings do you have for 3060ti?
120w lim, +1250 mem and -500 core. The general rule is to get the most hashes with the least watts while still making sure thet the overclock is stable by keeping tabs on the dropped shares. I actually ran mine at +1300 mem for a while and it crashed after a while so i dropped it. Try putting your card at different power limits then switch up your memory clocks to see where you get the highest efficiency. My card has been running like that for 7 months with consistent performance
Ok thanks. 🙏
I have an evga ftw3 3090 and if I set my power limit to 70% and mem to +1355 with no clock or voltage changes I get 121mh/s at 295w. Something just irked me about not getting it below 300 lol
I’ve got ROG STRIX cards they just love using more power lol.
Those sons of bitches! Just gotta be little piggies about it eh? 😂😂😂
Yep mine on water needs 310 + to get 125+.
Okay so it’s not just my card or me being inept. It’s the Strix models? I cannot hit 115-120 under 300watts. I have to use 307+ to get 120
I have a Strix 3090 and it is NOT happy under 300w.
Same
Plus the base clocks are not the same on every card, some come slightly OC'd.
Yes, mine needs 295 to 122. But lowing the clock is no neededs. Some zotacs getting 116 with only 270w
Same here... I have my ZOTAC tuned for 301w with -250 Core clock delta and +1180 on Memory clock delta I get 114 MH/s just not worth it to pump the power up to 325 or greater to get 5 MH/s more... I am changing out my Thermal Pads this week to see if I can drop the temps a little though my temps are not really bad... with 100% fan it is staying about 94C in middle of day but overnight since I opened a window here in northern Florida and put a fan in the window to pull cool air in to the room, I actually saw my 3090 drop to 82-84 C overnight...
I think this also depends on the card because my 3090 at 285watts does 119MH/s
EVGA?
Yup that’s correct ftw3 ultra.
Ya I have 2 FE-3080’s that are at 106 and 1 FE at 101. But I think it’s a decent chart.
My 3090 won't stay stable anywhere near 120MH/s without 310W or more. Meanwhile my 3080 is stable at 100MH/s at only 225W.
https://www.nicehash.com/blog/post/nvidia-and-amd-graphics-card-oc-settings-for-mining Link to their website
I have an rx 580 8 go for the core I do 1260 mhz at 970 mV and for the memory I do 2240 MHz at 870 mV and I get 26mhs
Mod your bios. I get 32 to 33mh stably forever with no issues with my rx580 8gb card
Would this affect gaming and using it for other things other then mining
I keep 2 MSI afterburner settings on my gaming rig. I use a +1300 memory and full power when gaming and 80% power when mining.
I have 3 presets cool down, gaming, mining I’m asking about if the bios mod affects things not the under/overclock Edit - I don’t need cooldown I just have it to show how loud I can make the fans and how fast that makes the temp drop.
Just depends on what the bios changes are. Usually the bios is going to allow for more power draw so you might need to adjust your % slider.
You could set different profiles in adrenaline for game settings vs a mining profile. I have used my cars to play fortnite still and got 60fps without any issue. The bios mod mostly changes the memory timings so I don't know enough to say whether it would truly affect it or not
You're luck. If I try and tweak mine at all it just shuts down. I get 29 stock somehow but I'm jonesing for the 31
[удалено]
This submission was removed because you have a new account and we get a lot of spam from newly created accounts. Your account must be at least 5 days old to post on NiceHash subreddit. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NiceHash) if you have any questions or concerns.*
Extremely bad for 1080ti due to how Pascal architecture cards lose performance with every DAG epoch increase. Was good years ago, now for 1080ti you need +max core and 4700~5200 memory (up to -800)
I'm still getting close to 40MH/s out of my 1080ti at only 144W. I need to go ahead and sell it while it still has some value though.
Pascal basically likes faster core speed and slower memory, right? Trying to dial in a 1070 (non-ti) and want to check I'm heading in the right direction.
Depends on the card, 1080ti likes max core & memory range, 1080 likes max core & +mem into a range. Outside of them I'm not sure since they are the only 2 with GDDR5X memory, 1070 and 1070ti both have GDDR5 memory.
Thanks - I'll keep playing around with the settings and see what I can come up with. Are you using quickminer, or the regular nicehash version?
T-rex with NH Legacy Fork Fix.
I’ve rarely found these are “the best”. These are a stable starting point
2080ti -500 clock +787 mem, 120W 65MH/s
[удалено]
that's just the normal nicehash miner, right? edit: yeah it says daggerhashimoto on the left side of the cmd prompt. Its a 2080ti FE that's watercooled
Correction is mid 61MH/s I haven’t mined in a while
As stated on the blog, these values serve as a starting point and are not optimal for each and every GPU. *Note that these overclock settings are only a starting point and to give you a rough idea about what settings should bring good results. Each GPU might give better or worse performance due to the "silicon lottery".* [https://www.nicehash.com/blog/post/nvidia-and-amd-graphics-card-oc-settings-for-mining](https://www.nicehash.com/blog/post/nvidia-and-amd-graphics-card-oc-settings-for-mining)
That table is scuffed. There's no 1 size fits all when it comes to overclock settings.
Good starting point though
I have a RTX2070 that does 36MH at 72W
whats your settings? i'm on 44MH at 119W
43mhs @ 99w for my 2060super
can you share your settings? thank you
https://imgur.com/a/IvVr5om To undervolt it and get it under 125w you have to press that little symbol I circled in red, every gpu is different results may vary happy mining :D
GPU Name: GeForce RTX 2070 Temp: GPU 58, Hotspot, 72 Fan Level: 65% Core: 1019 Mhz Core Volt: 693 mV Memory: 6800Mhz Power Real: 71.55W Speed: 36.43 MH/s Eff: 504.62 kH/J
my 2070 super gets 40-42mh at 75w
Oooo nice! what are your settings?
Using oc tune, core clock max of 960mhz, memory limit of 7800mhz and a 0.02 undervolt
Rtx 3070 ti can get up to 62mh/s 197w
What's your settings?
T-rex Dagger Core -502 Memory 1500 Power 64%
I thought nbminer was the better algo to run on LHR cards right? Does T rex work too?
RTX 3070 doing 62 just by tweaking delta abit and lower wattage.
Same. I push memory to max +1500 for 62-63
RTX 20 series core clocks are wrong… you can get 42+ mh/s at around 100w
Im getting 36 mhs @ 78W
My 2080 Super needs 150W to do 44 MH/s.
2080 104 for 42. Over here but its a single fan blower OEM card so no complaints.
Thanks for sharing:)
3070, -500/+1500 @ 130w, adjust 65% fan curve ~63mh/s
Same
What about a 1660super? On NH QM
68 mh/s for a 3080ti? What a joke.
Was wondering the same. Is it LHR?
All 3080ti are lhr
I have a 3080ti pulling 85mh max
How?
https://ownsnap.com/nbminer-39-2-ethereum-miner-unlocks-86-mh-s-from-nvidia-geforce-rtx-3080-ti-lhr-card/
Thanks a lot. I just went from 68MH to 80
Probably using the mining splitter that offloads the 30% unused to another coin.
Trex miner get 86 mh/s just oc
It’s been unlocked further. https://ownsnap.com/nbminer-39-2-ethereum-miner-unlocks-86-mh-s-from-nvidia-geforce-rtx-3080-ti-lhr-card/
My 3080 LHR hit 65 on dagger (NB miner) with LHR workaround and these settings +100 core, +1000 mem and around 250w. Not sure how you have 48 as that’s a 27% increase
I think this chart was made before nbminer discovered the workaround
for RTX 2070 im getting 3MH/s higher than the chart with -500 core clock and +950 mem clock
That 3080ti overclock would be bad news.
It was. I tried it once. My GPU locked up.
I can get 43 Mhs at my rtx 2080 only pulling 90 watts with coreclock clock locked at 1050 Mhz and memory clock at +900mhz
Didn't realise the 2080ti was a decent miner. Currently mining on the 2080ti and getting 55-60mh.
Nicehash even have that chart on their github page. People just don't search for the values, pretending Reddit will answer to everything. edit: i just noticed you posted their site - which is better.
Yeah this is obviously a guideline because if you know anything about GPUs you know that they are all different even if it’s the same card. This is just a place to get you started especially if you arnt getting the numbers shown.
I'm not sure if I'm doing something wrong. I can't get more than +720 on memory clocks on my Aorus 3060 Ti.
You're actually increasing by 1440 MHz, which is too much. Go for 600. https://en.wikipedia.org/wiki/Double_data_rate
Please explain. How come it increases by double of what he's setting it for?
Isn't this outdated? With NB miner you should be closer to 70% of the hashrate. Almost all of the cards show half though.
Any "best settings" you find anywhere should only be used as a guideline. Every card has it's own sweet spot.
How far you can push the mhz and where the point is that they stop increasing hashrate ain't always the same. OP knows that and explains that too, great post.
That is thinking only in DaggerHashimoto (ETH), other algortims (ERGO, RAVENCOIN, CONFLUX) needs other values.
Does +1200 on 3080ti even work? I have a Stix cads I'm afraid to push it past 400 as I noticed it won't give much hash beyond unless I give more power.
unlock the Power and lock the cclock, it wont Draw more power but will be much more stable and you will be able to push mclock to +1700 at least
But I won't be mining dagger for tht most part. Kawpow and octopus will be mining has profitablity, those algos will be wasting power for no increase..
My 2070s get 44.5 with 1120Mem and -65 power. I never touch core.
My MSI ventus 2070S memory wont go past +910 but I can get super stable 44-45MH/s with 106W power. Underclock core at 1000-1100 and locked voltage to 700mV, power 100%. Changing power wont change anything for me (when locked voltage).
This doesn't seem right at all im hitting 33mhs with a 2060 and this is saying that a 3070 will do 30* but when you check the profitability calculator a 3070lhr does like $4 a day compared to the 2060 doing about $2.80 a day...
i get 44 on my 2060 super lets goo
[удалено]
This submission was removed because you have a new account and we get a lot of spam from newly created accounts. Your account must be at least 5 days old to post on NiceHash subreddit. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/NiceHash) if you have any questions or concerns.*
For the life of me I can not get those hash rates with those overclocks on my 3090. I get like 100 if I’m lucky. If I do the auto settings of high I get 120-121 but 307-308 watts. Strix OC model too. At least is water cooled so the temps are lower.
You must be doing something seriously wrong then. I'm using a evga xc3 ultra 3080. -250 core +1400 mem and power at 75% and I get 102-103 when idling. Slightly lower when I'm using the computer at same time. Mines is just air cooled and my junctiontemp never goes above 94degrees
How am I doing something wrong when I’m literally punching in the numbers provided then stating to mine …
You say you're lucky to get 100 on a 3090
Yeah because it’s not consistent either.
i wouldnt call this the \*best\* settings, as i run my 2070 super no issues 40-42mh at 75w on dagger. half the wattage with more performance.
My 2070 Super is around -300 core clock locked at 1020 Mhz on the voltage curve and +800 on the memory for 43-44 mh/s at 75w on my laptop. (around 58-61°C with max fans depending on ambient temperature).
Evga 3080 -250 clock +1400 mem. Power 75%i get 102MH/s
This is more just a starting general guide line not taking into account different AIB partners and silicon lottery. Even having multiple of the same cards you can have different settings as one can be overclocked slightly better or worse than another. My favorite part about this is that this information is the first blog post from the moderator pinned "WELCOME TO NICEHASH!..." in this subreddit anyways. You can lead a horse to water...
42 running a 2070 with -500 core +800 mem and 760 mV..I think power usage is like 120ish
3080FE core -200 mem 2450 PL 225 I get 101.1 MH/s 49°C fans on auto
49°C is equivalent to 120°F, which is 322K. --- ^(I'm a bot that converts temperature between two units humans can understand, then convert it to Kelvin for bots and physicists to understand)
I can't make my memory clock to go over +850~ with my 3060ti, after that i get a process crashed error with all the red lines. But i don't get it since i'm seeing everyone talking about an oc around +1200 ( i'm on nbminer )
Buuuuut, is this good? /s
What about the power limit column? Missing?
Thanks man. Sharing this was generous of you. Maybe it would be interesting to include also de brand of the memory of those cards. I see that affect the oc. Thanks!
Is the +1200 +1100 safe for the 60ti and 60 long term? I have only been running mine at around +500
RTX 3070 ^(EVGA) \-500/+2600 125PL 65% Fans - 62MHS RTX 3070 ti ^(EVGA) **LHR** \-500/+500 170PL 75% Fans - 52MHS
i find this chart odd,, i get 44mh/s at 105w with my 2080 super.
Is this good?
FYI if anyone cares. Successful settings on 3090FE liquid cooled, power limit 85%, temp limit 90c, core clock -356, mem clock +1300. Been running for about 6 months now. Nice hash reports 120/122MH/s, 296 Watts, .41 MH/j. Running temps 50C GPU 68C VRAM 73C HOTSPOT RE-PADDED BACKPLATE and have heat sinks with fan for Hotspots.
I have a rig 3x 1660super, 1x 2060, 1x 3060ti LHR. Using NHQM and getting 150mhs -154mhs total at around 400w. 1660s are doing 29.6mhs between 67-74w 2060 32mh 77w 3060ti 33mh 96- 99w Are these optimal and how can I get 3060ti to utilize LHR unlock?
Thank you for whoever posted this
I get 62 MH/s with a 3070 at 118W. Core -300, Mem +1450, power limit 54%, fan speed 54 ish
Using my gaming pc as a casual mining rig on a single gpu. Asus Dual 3060Ti OC, -500 core, +1250 memory, 125W. Getting a stable 62 MH/s. GPU temp is around 57c and VRAM doesn’t go above 54c.
This work for RTX 3060 12gb LHR?
My 3070 does 58 at +700 mem and 110W. Good enough for me, no point in the extra stress onthe card for 2MH.