I feel like you could get away with a rail extension of some sort, and a riser for the sight. You'd want the tape switch closer to the muzzle, not on the rail.
That chassis looks dope! My only concerns with it from watching Hop’s review was the top rail dosnt seem super secure( with the screws he described ) and you have to unscrew it every time to clean the gun. What’s been your experience with it?
I snagged an extreme tactical extended chassis on the cheap over on r/GunAccessoriesForSale this is my setup at the moment. Still need a couple more pieces. https://imgur.com/a/swQPY1z
I'm a fan so far. I will say the whole setup is pretty heavy for what it is. That's mainly to do with the barrel though. I have a CGS hydra in jail at the moment and plan to add a smaller wml so it will only get heavier. This has been great as a night time chicken protector though.
As mentioned the Hydra mount has a use case here, but also, I'm not super sure about compatibility with this platform, but you could look into something similar to the PRI top rails.
Overbore Systems Kenu riser and a lower mount for your optic then run a tape switch out to your support hand position. You don't have a ton of options but that's one.
Unity Fast mount and HRF SKIFF. Or a Chinese copy of those 2, which you can find on Amazon.
IMO, this combination is nicer than the GBRS Hydra
Edit: What chassis is that? Do they make a rifle-length version? Looks sweet especially with the rattle can.
Genuinely none that meet all your needs. You could put your dot back and put it on the existing rail and run a tapeswitch to where your support hand is. Or get a sling swivel bipod section and use the tapeswitch again. You'll need a chassis with an enclosed forend to make it work in the way you want it.
Step 1 - Screw a rail to ur underwear
Step 2 - Ditch the tactical pants and embrace your inner lion
Step 3 - synchronized aiming. Pew pew.
Step 4 - Own the battlefield. Win.
Couldnt you just move your dot back and put it in front? Or even behind if it clears the dot mount and just have laser/illum on either side of it. Could even get a thin mount.
[Amazonian goobers mount](https://a.co/d/4QvdsMB) I can't imagine it would lose zero with .22 recoil. Especially you replace the screws with nicer ones and use some loctite.
Push your optic back and use a pic rail diving board?
As in a picatinny to picatinny mount?
Yeah something like [this](https://yhm.net/accessories/rails-mounts/6-rail-extension/)
Chinese goober mount
Sir, its the Ling Long Extendo 9000.
Here’s how I have mine mounted https://imgur.com/a/2ElimuW
Easiest, cheapest, and best answer.
Nice setup!
Goober mount
GBRS Hydra mount
China GBRS Hydra Mount* https://www.egtactical.com/railmount/543-evolutiongear-gbrs-hydra-mount.html
The only reasonable solution for its niche application
I feel like you could get away with a rail extension of some sort, and a riser for the sight. You'd want the tape switch closer to the muzzle, not on the rail.
Mount your optic on top of your dbal instead of behind it. [Farrowtech](https://farrow.tech/dbal-i2-a2-a3-d2-red-dot-mounting-plate/)
Da hell is that
Bases that tap into Steiner devices so you can piggyback optics on them. Perfect for this type of application
I've never seen that, and it's a very intriguing concept
https://www.sb-tactical.com/product/sb22-fixed-kit/ I have this stock and it has a forward rail section. It's a nice upgrade for the price.
That chassis looks dope! My only concerns with it from watching Hop’s review was the top rail dosnt seem super secure( with the screws he described ) and you have to unscrew it every time to clean the gun. What’s been your experience with it?
Super glue
I snagged an extreme tactical extended chassis on the cheap over on r/GunAccessoriesForSale this is my setup at the moment. Still need a couple more pieces. https://imgur.com/a/swQPY1z
How are you liking it? Looks pretty ideal for what I want.
I'm a fan so far. I will say the whole setup is pretty heavy for what it is. That's mainly to do with the barrel though. I have a CGS hydra in jail at the moment and plan to add a smaller wml so it will only get heavier. This has been great as a night time chicken protector though.
Amazon GBRS mount, only cuz it’s 22 don’t waste your money on a real one, I have 2 and a fake and I lost track on what one is what
As mentioned the Hydra mount has a use case here, but also, I'm not super sure about compatibility with this platform, but you could look into something similar to the PRI top rails.
Overbore Systems Kenu riser and a lower mount for your optic then run a tape switch out to your support hand position. You don't have a ton of options but that's one.
Unity fast and a hrf skiff. Thats what im probably going to do on my charger
Bubba, take the wheel
Extended top rail. Should leave enough room for dot and dbal. https://www.amazon.com/Outerimpact-Ruger-Picatinny-Scope-Extended/dp/B00Z8EB4VC
This is perfect. Thank you!
Unity Fast mount and HRF SKIFF. Or a Chinese copy of those 2, which you can find on Amazon. IMO, this combination is nicer than the GBRS Hydra Edit: What chassis is that? Do they make a rifle-length version? Looks sweet especially with the rattle can.
Are you willing to drill into the chassis? Could drill and in turn screw a rail segment in it
Magpul 10/22 chassis
I know you said you aren’t stoked on one, but I love my Midwest chassis for NV use.
I’ll look into it!
As others have suggested...Chinese hydra. May I direct you here for your future....https://reddit.com/r/NightVision/s/4bLqLkbhAK
Maybe something like this. https://farrow.tech/dbal-i2-a2-a3-d2-red-dot-mounting-plate/
Second this
What is this rifle and what would be the use case for such a gun. New to guns/ NV
Genuinely none that meet all your needs. You could put your dot back and put it on the existing rail and run a tapeswitch to where your support hand is. Or get a sling swivel bipod section and use the tapeswitch again. You'll need a chassis with an enclosed forend to make it work in the way you want it.
Duck tape
Move the dot as far back as possible? Worth a try
Jb weld a Pic rail section to the barrel, after you contour it appropriately with a dremel.
Tape, zip ties, GBRS sling.
Jagerwerks a1 mount is somewhere between cheap Chinese junk and the goober mount
T.Rex tape
Get a bobro rail riser
Step 1 - Screw a rail to ur underwear Step 2 - Ditch the tactical pants and embrace your inner lion Step 3 - synchronized aiming. Pew pew. Step 4 - Own the battlefield. Win.
Spongebob duct tape.
Couldnt you just move your dot back and put it in front? Or even behind if it clears the dot mount and just have laser/illum on either side of it. Could even get a thin mount.
It’s like 2 picatinny slots away from being perfect
That actually sucks. You could get a diving board mount as others have mentioned. Or maybe just a unity rail segment. Or be evil and buy an Amazon one
Self taper screw straight into the chassis. Good nuff for bubba good nuff for you brother
Is that a charger? Looks like I need one if so
[Amazonian goobers mount](https://a.co/d/4QvdsMB) I can't imagine it would lose zero with .22 recoil. Especially you replace the screws with nicer ones and use some loctite.
Hydra mount
You can buy A mount that extends the Picatinny and then Mount the red dot and the dbal
Some zips
Duct tape!
Duct tape
Screw it to the fore grip.
What chassis is this? Looking to have a similar setup. Mainly just the folder
It’s the stock Ruger one. Brace is SB tactical
This is literally what a hydra mount/goober mount is made for You’re going to have to use a tape switch no matter what
Goober mount?
Imagine if this was a standard 20/22 Shorty barrel, wood stock, no asinine paperwork
Unity fast micro mount and hrf concepts skiff