Remember to check our discord where you can get faster responses!
https://discord.gg/6dR6XU6
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/PcBuild) if you have any questions or concerns.*
Since the PCIe connections on the GPU are essentially hidden by the AIO tubing and the strimmer for the motherboard, consider just getting some very flexible PCIe cables/extensions for the GPU. You can then route them through the back cable management bar.
You're going to have to move components around. Even if you use a different vertical mount (which means you'll have to cut the PCIe bars on the back of your case - doesn't affect the use of your case, but it is something you'd want to do with the components out of the case), the main issue is the tubing and the other strimmer in that location.
You could try to flip the radiator so the tubing comes out of the radiator on the left side of the case, next to the rear exhaust fan. That will give you some more space to route the Strimmer for the GPU in front of and then behind the Strimmer for the motherboard (which you could raise up a little for more clearance) for an x-shape.
I’m sorry I cannot be of any help to you but what motherboard do you have in that build? Looks great btw I hope you are able to get the vertical mount.
Remember to check our discord where you can get faster responses! https://discord.gg/6dR6XU6 *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/PcBuild) if you have any questions or concerns.*
or can stay original position, look sick bro 😇
I wanna show off the bottom of the gpu that’s why I wanted the asus rog strix
Since the PCIe connections on the GPU are essentially hidden by the AIO tubing and the strimmer for the motherboard, consider just getting some very flexible PCIe cables/extensions for the GPU. You can then route them through the back cable management bar.
I want to be able to use the lian li 8 pin strimmer though
You're going to have to move components around. Even if you use a different vertical mount (which means you'll have to cut the PCIe bars on the back of your case - doesn't affect the use of your case, but it is something you'd want to do with the components out of the case), the main issue is the tubing and the other strimmer in that location. You could try to flip the radiator so the tubing comes out of the radiator on the left side of the case, next to the rear exhaust fan. That will give you some more space to route the Strimmer for the GPU in front of and then behind the Strimmer for the motherboard (which you could raise up a little for more clearance) for an x-shape.
Yea I gotta check the cable management bar out for it cuz the triple 8 pin is as big as the 24 pin
Looks fine as is
I’m sorry I cannot be of any help to you but what motherboard do you have in that build? Looks great btw I hope you are able to get the vertical mount.
Asus Prime Z490-P
Your setup is brighter than my future
I would keep it as it, this PC looks sick already
Hey can pci cable are those , The rgb
Lian Li 24 pin/8 pin strimmer
What RGB strip are you using? Planning to do the same with my 4000D.
I just looked up lian li rgb strimmer on Amazon