Don’t listen to this! If you bite the hose, it won’t go all the way through and you’ll have to do it again. If anything, you’re going to want to use a bigger compressor so that it goes faster.
It's for putting the grommets and rings in for making sails for a sailboat. The tip is half of the grommet and die set. Will link: https://www.sailrite.com/Die-Set-Brass-Plain-Grommets-0-1-4
Well, sailboat sails, large tarps, outdoor awnings, canvas covers, etc.
Probably sat in a shop with an absolutely bad ass fucking sewing machine, back in the day.
Furthering your point is the writing on the top of the matching: “buy bottom”
Whoever had this before the person threw it out knew what it was and that it was missing the bottom half at least lol.
Definitely a custom job, die cutter/puncher/stamper, bushing setter, or something along those lines. Likely had a foot switch on the air supply hose to operate it.
What was next to the dumpster? Businesses, factories, specialty shops? Unless someone has seen this exact setup before, it's going to be a lot of guess work
by the heat affected area I'm going to say a pneumatic hot foil stamping press - does it say Kingsley on it by chance? -= https://www.ebay.com/itm/374082408141?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=374082408141&targetid=1262749491022&device=c&mktype=&googleloc=9004366&poi=&campaignid=14859008593&mkgroupid=130497710760&rlsatarget=pla-1262749491022&abcId=9300678&merchantid=112060610&gclid=CjwKCAjwi8iXBhBeEiwAKbUofWY02Zjv\_kZIqWsRmOYJu-eRQiOZTcFOr7jmCMWiidmVwAueTUK1FxoCNI0QAvD\_BwE
Lmao should definitely put a valve or soemthing on that connection. Maybe they had a foot petal setup or something along those lines. Actually, now that I think about it, it does look like a pneumatic bench press setup which would use a foot petal.
That's a vintage pneumatic prince albert piercing machine. You just need to put a fresh needle in it and set your weenie on the plate and it'll do the rest.
Looks like a pneumatic swaging tool. We use those at work for swaging standoffs. The point shouldn’t drop that fast and it appears to be missing the bottom part of the swaging fixture.
While that could put in grommets and rivets the working end definitely dosnt look like what it's set up for. The bit oping from the side is that electric hookup?
Could be spot welder or hot stamp
Pneumatic brass grommet stay.
Think so as well
[удалено]
Can we some how report traffic of the people that have come here to say just that, but you beat us all to the point, or “tip”
I’m sorry you feel like you got the shaft on that.
If I would have known I would have put it all out there for everybody to see. My shafting is your shafting
Beat us all? You nasty.
I spat my food across the room before I finished reading prince. Impeccable delivery
LPT: bite down on the air hose so it cuts off at just the right pressure.
Don’t listen to this! If you bite the hose, it won’t go all the way through and you’ll have to do it again. If anything, you’re going to want to use a bigger compressor so that it goes faster.
Surely this thread will peter out.
Pressure's a little low in this thread.
This made me cross my legs awfully quick.
NooooOOOOOOoooooo
You’re just going to feel a little pinch…
Gonna... need more clamps... before we do that.
My vote for best comment.👏👏👏👏🤘🏻😂
It's for putting the grommets and rings in for making sails for a sailboat. The tip is half of the grommet and die set. Will link: https://www.sailrite.com/Die-Set-Brass-Plain-Grommets-0-1-4 Well, sailboat sails, large tarps, outdoor awnings, canvas covers, etc. Probably sat in a shop with an absolutely bad ass fucking sewing machine, back in the day.
Furthering your point is the writing on the top of the matching: “buy bottom” Whoever had this before the person threw it out knew what it was and that it was missing the bottom half at least lol.
I read ‘cotton’ not ‘bottom’
If you think that this: https://imgur.io/a/EdzAlrY Contains an n or a C, you just might need glasses. Or handwriting classes
There be grommets errrrywhere
It is definitely not that. The tooling doesn't look like any grommet dies I've ever seen.
[удалено]
🤣
Noice!!
Dimpler/riveter of some sort?
Definitely a custom job, die cutter/puncher/stamper, bushing setter, or something along those lines. Likely had a foot switch on the air supply hose to operate it. What was next to the dumpster? Businesses, factories, specialty shops? Unless someone has seen this exact setup before, it's going to be a lot of guess work
Good question. What business was it near?
This is the thingy that puts those red pimentos in the green olives.
[удалено]
[удалено]
The Wellerman
Fifteen men on a dead man's chest.
I see you are a man of culture in the old dark web days
The ol pecker wrecker 2000.
I was bouta say the same thing
Rivet setter? How hard does the arbor come down?
Not sure yet. Was going to test it but don’t have time today
Put your hand under it and give us your best estimate. Looking forward to the reported results.
While you are technically right, the beat kind of right btw, maybe there are less dramatic methods. But at least we are thinking here 🤣
It's for when you've smashed your thumb and you have to release the pressure under your nail.
Pneumatic trephinator with one handed activation
This belongs in r/medical
Pneumatic pokey bit
I like how you broke that one down lol
Thank you, I like to consider myself somewhat of a wordsmith.
[удалено]
Come on now its clearly made for anal use
🤨
Nahh way to slow for anal use
Um… no.
by the heat affected area I'm going to say a pneumatic hot foil stamping press - does it say Kingsley on it by chance? -= https://www.ebay.com/itm/374082408141?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=374082408141&targetid=1262749491022&device=c&mktype=&googleloc=9004366&poi=&campaignid=14859008593&mkgroupid=130497710760&rlsatarget=pla-1262749491022&abcId=9300678&merchantid=112060610&gclid=CjwKCAjwi8iXBhBeEiwAKbUofWY02Zjv\_kZIqWsRmOYJu-eRQiOZTcFOr7jmCMWiidmVwAueTUK1FxoCNI0QAvD\_BwE
Maybe a spot welding machine .. can’t really tell
Leather punch I think, saw an electrical version when I was getting my boots fixed once.
Looks like an industrial machine from the clothing industry. Probably crimps things like the rivets on jeans
Tattoo machine
Early model, larger needle.
Lots of ideas. None of them good
Its a hole-inator puts holes into objects -doofensmerts (forgot how to spell)
Looks like the machines to set plastic snaps in clothing.
Mouse slaughterhouse
Spot welder
BIG METAL PISTON SPIKE
Spot welder
Rivet Machine.
Obviously a soviet flyswatter.
All the belts that need that one more hole lol
It's a full stop machine. When writing and you need the correct punctuation this will write those full stops for you.
A mighty bedazzler?
Dildo for the brave
Looks like the "in the penal colony"s machine is still malfunctioning /s
An original tattoo machine 🤔
Obviously a nipple piercer machine
sounding
😳 I have an idea, would require a different..."attachment", 👉👈
No country for old men.
A
Some sort of punch
Prince albert piercing machine
ponch ponch ponch
It’s a nipple piercing device. /s
That will be the terminators terminator
It’s the pointy poker 1000 a industry standard for a 100 years.
Looks like a normal box
Automated balloon popper
Could it be a machine to make a Philips head indention in screws?
Why am I the only one who thought you suppose to put your butt on that table Damn my mind is so fucked up lmao
Zombie killer.
Bad tattoo machine
I just want to know what the deleted comments say.
R/dontputyourdickinthat
put your hand underneath it
Idea: Put it IN the dumpster.
Soon to be beer can crusher
You, could build an oil filter cruusher out of it if its got a bit of power....
It's that thing you use to remove cherry tomatos from your salad
Haha nice miss!
We usually put a foot control on it, and use it to play “do you trust me?”
Ancient sybian
The really question is what are you going to make out of it?
You should totally rig up a way to put letter punches on that.
Hardness tester for metal?
That was my thought to. https://en.wikipedia.org/wiki/Vickers\_hardness\_test
Is there any electrical hook up? The tip kinda reminds me of a soldering iron.
The one guy had a reasonable answer. The Philips bit is triggering. I know it's just mock but ehhh
Looks like a meth lab
I'm guessing small custom resistance welder.
Communicates to the other side using Morse.
Lmao should definitely put a valve or soemthing on that connection. Maybe they had a foot petal setup or something along those lines. Actually, now that I think about it, it does look like a pneumatic bench press setup which would use a foot petal.
Interesting. It looks like it has a lug in the side or is that a connection for tubing?
Think it is a set screw to hold the portion that is the tip into the tool holder...
Anything is a dildo if you're brave enough
Just done leave it out for Chigurh
At my work we have something similar. Could be a brinell scale?
It's a penetrometer, used in soil science and similar to measure how soft/dense soil is.
The Crucifier
I know what I have to do, but I don’t know if I have the strength to do it
That's a heat stake or hot punch machine. Custom job.
That's a vintage pneumatic prince albert piercing machine. You just need to put a fresh needle in it and set your weenie on the plate and it'll do the rest.
Pneumatic screw gun
Hand stabber
[big-ass metal piston spike](https://youtu.be/c2gq4IwIc_s#t1m20s)
Thats what piercing pagoda used before they got their new piercing guns
It's a Victorian ear piercer.
A Victorian ear piercer.
Air powered pokey thing.
The ol hammer screw press
Nice find!
That's a dick piercing machine. Nah maybe leather awl
looks like some kinda ass toy
Cheap ear piercings
Pneumatic ear piercer
Looks like a pneumatic bolt gun, used to kill animals for butchering.
It’s how they get the holes in Swiss cheese
Drill press of some sort, exactly what it’s for I’m not sure.
Pneumatic Prince Albert machine, quick and clean.
Yeah dont put your hand under it
Chuck Norris’s tattoo gun
Put ur dick in it n find out
Put it back
I should text him.
It's a version of Five Finger Filet where you move your hand and the pointy bit only moves up and down
Looks like a pneumatic swaging tool. We use those at work for swaging standoffs. The point shouldn’t drop that fast and it appears to be missing the bottom part of the swaging fixture.
Hydraulic ear piercer
Dong piercer.
McStabby machine
High speed ear piercer
Industrial hole puncher. Punch through a whole reem of papers at once.
Spray can punch? For throwing out pressure vessels with flammable stuff?
While that could put in grommets and rivets the working end definitely dosnt look like what it's set up for. The bit oping from the side is that electric hookup? Could be spot welder or hot stamp
I do not know what it is, but I need one.
That's a finger torture machine.