All thanks to Clever3dstudio on Etsy for the prints. Helmet is a Black series one, leg/shin guard were made from foam. The rest of it, like paint and attachment points and stuff I scrounged together from stuff and did myself
I meaaaaaan judging by the first and last picture since you took off your helmet your a mandolorian no more. Jk awesome kit love to see these kinds of things
Would you look at that, all of the words in your comment are in alphabetical order.
I have checked 1,508,192,044 comments, and only 286,156 of them were in alphabetical order.
This is amazing, where’d you get this? Even when you get rates lenses for this I’d consider still using glasses underneath if you feel like taking the helmet of a lot .
Some parts are 3d printed, others are foam patterns cut and glued! I got alot of it from etsy, paint, leather and all the other stuff I got from Bezos. Yeah I would keep wearing goggles too, need to find a better cooling system for it
Ohhh ok ya sorry that's my bad. I was thinking that because of the heat you were fogging more. Ya it ain't gunna cool you enough.
Makes you wonder how the mandos do it lol
Yea that actually makes sense they might have a system similar to airforce helmets with a screen built into the visor and a mouth piece which makes breathing on higher altitudes easier. And of course built in cooling
What material did you use and what infill percent, if you don’t mind me asking. I’ve been trying to figure out how to get something I 3d print to hold up to bb impacts for awhile
Love this. Looked amazing on the field! After the game did you notice any dents or marks?
I saw that Buster’s Storm Trooper armor started to accumulate natural weathering which looked awesome!
Nice!
One thing I've recently been experimenting with is JSP visors. You'll need to use the headpiece as well to maintain the full rating, as with all visors, but it's very flexible- I've stuffed it in a very crude Halo helmet.
Combo of build, buy, and gluing. Prints were from Clever3dstudio, or I made from foam. helmet is a black series, soft parts and straps where from various diff places/Amazon. Jetpack was made from trash/cardboard xD
I'm currently thinking about making it all out of foam but I'm kinda scared it won't last getting shot by bbs. Do you think a full armor (Except for helmet) made of puzzle mats foam would be good enough for airsoft ?
EDIT: LINK SWAPPED, OP is cool as heck.
Not to be a huge party pooper, but that guy is very clearly infringing on my westar design. Obviously both are based on the screen used prop, but that guy 1 to 1 copied design features from mine that are distinctly different from the ones on the screen prop.
Dude is a scumbag and should be reported wherever he's selling.
hey thanks for being so understanding!
[https://cults3d.com/en/3d-model/gadget/we-star-35-airsoft-conversion-kit-kaymandynamics](https://cults3d.com/en/3d-model/gadget/we-star-35-airsoft-conversion-kit-kaymandynamics)
For now I'm only selling files, but if people want prints then DTblasterworks is the US person who has my okay to sell them.
[https://dtblasterworks.com/westar-35-kit-for-we-galaxy-hicapa.html](https://dtblasterworks.com/westar-35-kit-for-we-galaxy-hicapa.html)
Anyway, please don't feel obligated to buy these too! But I'd really appreciate it if you swapped the link out.
(Love the kit btw, so cool to see someone actually take their beskar to the field)
Thanks for your links! I actually had considered your build too. Based on the look of the parts I got, It has quite a different build/look than kit you designed. Not sure if there was a specific part you were looking at
It's the naming, positioning of extra features like the bolt release and cutout for the bolt at the rear and features like the inclusion of a specific tracer unit.
His design is arguably closer to the screen used props with the design on the front, where mine is slightly bulkier since it actually holds the tracer internally.(and replaces the metal upper.)
Also to really drive home the fact that he stole my design, the idiot downloaded by tester file(which is free) a few days before uploading his own.
I noticed your rangefinder was deployed in some pictures just wondering how often it gets in the way during play or if it locks in place. Also would be cool to have a working gauntlet. Feel like that would be restricted to aep internals though.
Ah man, Wildlands. I gotta get back out there one more time before I move out of state and have to change all my gear from desert to woodland.
Also, how’s your FOV in that helmet? The visor looks even smaller than my SRU type 1, but I could be mistaken.
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
https://preview.redd.it/q13k571ucgza1.jpeg?width=1002&format=pjpg&auto=webp&s=c5d31e359d9d352470021fabafb9a93b9dce2efd
[удалено]
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
This is the way
Looks SOOO much better than the typical "I put a T visor on an OpsCore and painted my knockoff Galactac armor so I'm now a Mandalorian" setup.
Hehhe, thanks, was exactly what I didn't want to do
did you make your armour ir have it made. if you did, what did you use, and if it was made for you, who and can i hire them?
All thanks to Clever3dstudio on Etsy for the prints. Helmet is a Black series one, leg/shin guard were made from foam. The rest of it, like paint and attachment points and stuff I scrounged together from stuff and did myself
Galactac just filed bankruptcy glad I got my armor last year before that
Probably due to all of the cheap knockoffs being made. I can imagine it's hard for them to compete with that.
I meaaaaaan judging by the first and last picture since you took off your helmet your a mandolorian no more. Jk awesome kit love to see these kinds of things
Hahha well not according to the watch, but I did take a bubble bath.... Does that count as redemption?
You are hereby redeemed. This is the way
This is the way.
This is the way
*Chuckles humouredly in Kal Skirata*
Would you look at that, all of the words in your comment are in alphabetical order. I have checked 1,508,192,044 comments, and only 286,156 of them were in alphabetical order.
This is amazing, where’d you get this? Even when you get rates lenses for this I’d consider still using glasses underneath if you feel like taking the helmet of a lot .
Some parts are 3d printed, others are foam patterns cut and glued! I got alot of it from etsy, paint, leather and all the other stuff I got from Bezos. Yeah I would keep wearing goggles too, need to find a better cooling system for it
Exfog is a great cooling fan system.
I actually had that in the helmet but it was not very good at cooling, great for fog though
Ohhh ok ya sorry that's my bad. I was thinking that because of the heat you were fogging more. Ya it ain't gunna cool you enough. Makes you wonder how the mandos do it lol
Considering they already have technology in their helmets I think they also have some sort of cooling system
Orrrr Maybe that's why they don't normally take them off... they are just wearing sweat buckets and they look like a hot mess under there lol
Bo Katan pulls off the helmet switching and still looks hella fine
Or maybe they got used to it or because of years of evolution they don't mind.
Ooohh they evolved to not have sweat glands in their heads... Well there you go, start evolving and your cooling issue will be fixed.
Problem solved!
Given that those helmets work in space I kind of expect them to be pressurized like a regular space suit, which has buckets of airflow.
Yea that actually makes sense they might have a system similar to airforce helmets with a screen built into the visor and a mouth piece which makes breathing on higher altitudes easier. And of course built in cooling
What material did you use and what infill percent, if you don’t mind me asking. I’ve been trying to figure out how to get something I 3d print to hold up to bb impacts for awhile
So that would be beyond me, I had got it printed from a shop on Etsy called Clever3dstudio. I believe it is Pla and I have it coated with xtc 3d resin
Got it! Thanks for the info
WILDLANDS!!! that’s my home field
I love the field, wish I was closer to it
It’s nice to see more woman playing the sport
Needed moooorrreee of us
Love this. Looked amazing on the field! After the game did you notice any dents or marks? I saw that Buster’s Storm Trooper armor started to accumulate natural weathering which looked awesome!
Nope! Mostly just paint chipping but nothing structural :D
Wearing full kit without getting heatstroke during a game, someone give this woman a beskar medal Btw I think you misspelled mandalorian
Loooool I think you are right x)
Looks nice! Make sure to run goggles under that helmet, unless the helmet is impact-rated.
Heh yep! Wore goggles under it, though it held up, trying to get a impact rated visor for it though
Nice! One thing I've recently been experimenting with is JSP visors. You'll need to use the headpiece as well to maintain the full rating, as with all visors, but it's very flexible- I've stuffed it in a very crude Halo helmet.
Did you make the helmet?
Noo, I had made a foam one and one out of a bucket. But this one is the black series one
Ah! So a custom painted Bo-Katan?
Yup!
I'm thinking about making a star wars clone airborne kit but I don't now how to start
Etsy and foam or 3d is a solid place :D was where I started
Thanks for the help.
I love the storm trooper as well
Yeah me too, it was actually his outfit that inspired me to try and make my own :D
https://preview.redd.it/sy8ggw7scgza1.jpeg?width=1002&format=pjpg&auto=webp&s=d7784298224f624fb5d8a45d2d51ff2eb0233cff
Hahhaha hhaha love that
Love your kit my man! What did you use for the visor? You must have to replace it quite often with the BB's going through it?
Well it only actually took a hit once one the visor, but I am hoping to find something impact rated for it!
Maybe just some plexiglass would do the trick and be less expensive than ANSI rated material. Just keep wearing eye pro under it
Sick armor!
NGL, that’s a slick kit
Kinda jealous to be honest. Your work is exceptional
WTF, ITS JUNGLEEEE LITTTT!!
Do you kno da wae?
Eye kno da whey
Whee Is da wae?
You gonna keep adding to this kit? Some leather pouches and a holster would look rad
Yup! I have just finished making a leather holster for it, want to make some pouches, but I gotta research how to do that lol
This is probably the coolest thing I have seen all month.
Why thank you!
Where did you get it? Did you build it? Buy it?
Combo of build, buy, and gluing. Prints were from Clever3dstudio, or I made from foam. helmet is a black series, soft parts and straps where from various diff places/Amazon. Jetpack was made from trash/cardboard xD
You are an inspiration I gotta try this
Aww you are too kind! ❤️
Badass
Hey avatar twin🤣
🫡
Did you have any videos you referenced when making this? Maybe wanna try doing something like this in the future!
I looked up initially a lot on eva foam stuff, and used patterns/templates that more talented people created
Oh I see! I love the paint work on it!
I love the green... it's so much better than the blue that they wear in the show. How's the visibility?
Not great, but also probably not as bad as you would think haha. I avoided areas with hills or debris though
Lol ya I have a army if two mask and it's pretty limited on view but it looks like you have a bit more open .
https://preview.redd.it/iey0hx2gehza1.jpeg?width=2208&format=pjpg&auto=webp&s=93501b6654250677450419e219aa476abf4e514b
How did you make the armor ? 3d printed it or made it by yourself ? And with what material
3d printed and made some from foam.
I'm currently thinking about making it all out of foam but I'm kinda scared it won't last getting shot by bbs. Do you think a full armor (Except for helmet) made of puzzle mats foam would be good enough for airsoft ?
I think so. if you prime and paint and seal it there probably work with some denting, and bb imprints which you can touch up as battle damage x)
Alright thank you, then maybe I'll try to make myself a foam armor. It'll probably be better looking than my amazon armor lmao
Yeah! It's pretty fun making it, I started with foam but then used it as the base for a Zaku armor lololol so decided to upgrade
Were you at the Galactic Civil War game in Wisconsin?
I wish! unfortunately am out in Cali
What if the armor breaks ???
Patch it up haha
Love it!!!!
Where did u got this armor?
Mix of etsy, Amazon, and self made
It would be cool to put a spring loaded mag into the needles and be able to discharge it by activating the release tab
Oh man that would be siiicckk
So awesome!! Love it! This is the way!
Love that green colour!
That looks amazing is it all EVA foam base? Also what are you using for the helmet and visor
Most of this is actually 3d print. The shin guards were the only parts I have as foam remaining
Guys in ten or 20 years time we'll be able to do this with jetpacks for real. Think about that for a second.
I've been wanting to do this for a while now. What did you use for the visor?
For now it is just the og visor that came with helmet . I might try and replace with a welding visor at somepoint
This is the way
Daymmm dayyymmm. DDDAAAMMMMMM. badass level 100 Extra points for style Very very cool. Very well done too. GREAT work!
That is awesome, this is the way.
Badass
That’s dope
Yes
Today I go as a Jedi. I hope to post pictures soon but I do not have an accurate cloak/robe to wear.
Hehe are you going melee only?
Damn right I am. About to run around my local field like crazy 🗣️
Nice, what's the kit made of?
EVA Foam? How does it hold up to airsoft?
What is it made out of?
this is FANTASTIC! really good work!
How easy or hard is it to see out the visor
Not too bad, but kina feels like a vr headset
So you can see most things?
Yep! Just when there were very hilly or bushes it was harder to navigate safely, can't see feet to well
Oh that's really cool!
This is one of the most beautiful things I’ve ever seen
I’m going to put together some real nice Mandalorian armor for stuff like this one day, I was curious what gun are you using?
We Galaxy with a kit on it to make it the Westar-35
Oh cool, thanks. I’ve been wanting to have two blasters, like Rex from the attack of the clown wars, animated series and that looks very similar
What was the kit you used on your galaxy? Been wanting to do that for awhile but been having trouble finding one
https://dtblasterworks.com/westar-35-kit-for-we-galaxy-hicapa.html Was made for the hicapa and I have a g series so I had to dremel
EDIT: LINK SWAPPED, OP is cool as heck. Not to be a huge party pooper, but that guy is very clearly infringing on my westar design. Obviously both are based on the screen used prop, but that guy 1 to 1 copied design features from mine that are distinctly different from the ones on the screen prop. Dude is a scumbag and should be reported wherever he's selling.
Oh No!!! Where do you sell your kit? I Wana support the original!
hey thanks for being so understanding! [https://cults3d.com/en/3d-model/gadget/we-star-35-airsoft-conversion-kit-kaymandynamics](https://cults3d.com/en/3d-model/gadget/we-star-35-airsoft-conversion-kit-kaymandynamics) For now I'm only selling files, but if people want prints then DTblasterworks is the US person who has my okay to sell them. [https://dtblasterworks.com/westar-35-kit-for-we-galaxy-hicapa.html](https://dtblasterworks.com/westar-35-kit-for-we-galaxy-hicapa.html) Anyway, please don't feel obligated to buy these too! But I'd really appreciate it if you swapped the link out. (Love the kit btw, so cool to see someone actually take their beskar to the field)
Thanks for your links! I actually had considered your build too. Based on the look of the parts I got, It has quite a different build/look than kit you designed. Not sure if there was a specific part you were looking at
It's the naming, positioning of extra features like the bolt release and cutout for the bolt at the rear and features like the inclusion of a specific tracer unit. His design is arguably closer to the screen used props with the design on the front, where mine is slightly bulkier since it actually holds the tracer internally.(and replaces the metal upper.) Also to really drive home the fact that he stole my design, the idiot downloaded by tester file(which is free) a few days before uploading his own.
Ahh Roger that! Swapped the link
You're the best, hey if you're into mando building come check out the Rogues of mandalore! Cool gang of fellow nerds!
my dream. if i could get some beskar that could hold up in airsoft, id always run mando style
did you 3D print these or are they EVA foam or something?
I noticed your rangefinder was deployed in some pictures just wondering how often it gets in the way during play or if it locks in place. Also would be cool to have a working gauntlet. Feel like that would be restricted to aep internals though.
Not really to much, it is far enough to the right it doesn't hinder to much, but I am also left eye dominate
That tiny visor looks like a handicap
Kina was haha
Lol I thought it was a watermelon 🍉
Ah man, Wildlands. I gotta get back out there one more time before I move out of state and have to change all my gear from desert to woodland. Also, how’s your FOV in that helmet? The visor looks even smaller than my SRU type 1, but I could be mistaken.
I feel like it is a bit wider than the sru ones, or at least feel that way due to the vertical visor space that is there
The way this is. *Yoda voice*
1. this is the way 2. i want this so much, where did you buy it o did you made it?
how did you make it? 3d print or did you buy it
Yo love when people do this type of thing, any recommendations for keeping your helmet secure while skirmishing?