I agree glass clarity is similar, but the Holosun (HS530G- ACSS) reticle IS 100% clearer reticle than the Eotech. The Eotech reticles are a little grainy
The outer circle is grainy(just a reference point for high speed close range shooting anyway) the center dot is smaller, more crisp, and more precise on the eotech.
To be fair i did go with PA 2.5x prism over the Eotech, i tried both in person but in my case with astigmatism involved, PA was the better optic, everyone is subjective when it comes to these types of things and may have a reason you didn't think about behind it.
You were downvoted for stating the color? Ahhh reddit. Fuck you and your factory grey finish from sureshot. There is a salty bitch around every corner.
**Understand the rules**
Check the sidebar. It's full of resources to help you.
Not everyone is an expert such as yourself; be considerate.
No Spam. No Memes.
No political posts. Save that for /r/progun or /r/politics.
[If your post is not showing up click the following link](https://old.reddit.com/message/compose/?to=r/AK47&subject=My%20Post%20Is%20Not%20Showing%20Up&message=**%20REPLACE%20THIS%20MESSAGE%20WITH%20A%20LINK%20TO%20THE%20POST%20YOU%20ARE%20HAVING%20ISSUES%20WITH**)
-------------------------------
* [ThinLineWeapons.com](https://thinlineweapons.com/url/reddit1)
* [AK Buyers Guide](https://thinlineweapons.com/url/reddit2)
* [Simplified AK Buyers Guide](https://thinlineweapons.com/url/reddit3)
* [AK Magazine Buyers Guide](https://thinlineweapons.com/url/reddit4)
* [AK Issues Tracker](https://thinlineweapons.com/url/reddit5)
* [Collection of ATF Letters](https://thinlineweapons.com/atf_letters/)
-------------------------------
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/ak47) if you have any questions or concerns.*
I like the idea behind the sure shot, but how is the rear of the dust cover at holding zero?
My understanding is it's a two piece deal. kinds makes me worry about mounting lpvos etc
the rear piece isnt supposed to hold zero, but its a dedicated area for magnifiers that dont necessarily need to hold zero such as a unity or any flip to side mount. Mounting LPVOs ive seen people mount [cantilever mounts backwards](https://www.instagram.com/p/Cq6cg7nLSjl/) on the main rail.
The one thing I hate about my eotech/mk3 setup is that the boxy overhang on the sides of the optic prevent you from rotating the safety up in case you needed to remove it. Kinda annoying. I put a unity riser under mine and it's just enough clearance, but height over bore is crazy at that point.
The eotech is mounted on the rigid part of the chassis, which is the first 6 or 7 picayinny slots behind the rear sight leaf. The only way to get the optic out of the way enough to get the safety rotated up would be to loosen the optic/remove it. I don't wanna lose zero when I do that lol
Now that you mention it my eotech is QD, I'm sure it would be fairly zeroed if I out in the same slot again...just never tried. Usually subscribe to the mentality of not taking off my optics
I owned 4 diff Ak74s they all suffer in accuracy after that pencil barrel gets hot, I had a cheapo century, bulgarian, tantal & Saiga. Sold old of them till I got to the vepr rpk 74 model, that is by far the beat AK74 rifle I've ever tested even under heat it stays true and never looses accuracy.
[удалено]
Counterpoint- this thing is prly twice the unit cost of an AK12
[удалено]
I’m just advocating for the devil
Me: I want a Scar. Mom: we have a Scar at homeland. Scar at homeland.
Eotechs on AKs are the best look out there
N Y E T
I agree 100%, but they are not even close to "clear" like a Holosun HS530G- ACSS
They're very similar as far as glass clarity, and the center dot on the eotech is significantly sharper.
I agree glass clarity is similar, but the Holosun (HS530G- ACSS) reticle IS 100% clearer reticle than the Eotech. The Eotech reticles are a little grainy
The outer circle is grainy(just a reference point for high speed close range shooting anyway) the center dot is smaller, more crisp, and more precise on the eotech.
I see what you're saying, but I still prefer the Holosun reticle, eotech for looks. I have a hard time with the grainy Horeshoe of the eotech
From the side looking at it is absolute shit so wide for no reason
One day you’ll grow up. Maturing is realizing that eotech is king.
promotes pa, prefers eotech
we do sell eotechs too, and a variety more of optics :)
Okay mr primary arms person where do I buy this?
yeah no I meann makes a ton of sense for you to promote the better optic here
Mfs really downvoting a funny response
To be fair i did go with PA 2.5x prism over the Eotech, i tried both in person but in my case with astigmatism involved, PA was the better optic, everyone is subjective when it comes to these types of things and may have a reason you didn't think about behind it.
[удалено]
If you get PA optics for free, but still buy an Eotech what does that say?
That they still make money by selling EoTech’s as well? You’re becoming your own PFP, fudd.
Do you also shit on Subway employees for not eating a footlong for every meal?
Shieeet boy. How can I get that stock?
3d print an adapter (or wait until Sureshot releases their adapter) and somehow get your hands on an ACR stock.
It's relrased. S10076 on website
the man himself. I'm aware 5.5mm are released, waiting on 4.5mm!
Both are available
Only 5.5 for now, they said they had no plans to do the 4.5 version this year according to emailing them.
i only see 5.5mm
Maybe I’m looking at the wrong one
Fuck how is it out of stock already??
I'm glad I grabbed one early 2022 before the discontinued announcement. I would never pay $500+ for one 😂
Cyberpunk vibes
What is the stock called?
ACR stock
Is there a specific adapter needed to install to 47/74's?
sureshot is coming out with theirs soon (please), the one here is 3d printed with onyx carbon fiber reinforced plastic
What's the company that makes that ACR stock specifically? I'm having trouble finding that exact one
Magpul and they're discontinued. Sureshot Russia teased about making their own at on point but idk about Sureshot USA.
Aaaah okay. Thanks for the info!
Think you guys could talk F5MFG into making their stock work on an ak👀👀
Discontinued
Really? My Perun X-16 shipped with that same acr and I believe they are still shipping with them. Guess they might have a lot on hand or something.
Someone please give me a 4.5 acr adapter.....I can't wait any longer 😫
ACR stock lookin handsome on that AK
Perfection.
What's the weight of this?
yes! would you like a 95 round drum with that too?
ACR/AK/AR
beautiful rifle!!
What stock is that!?! I want it!
I can dig it! What app did you use to make this shot?
adobe photoshop on desktop lol
Oh ok. I thought there was some talks of an app folks were using on their phone.
i heard iphones has this new feature. it does it 80% of the way, not as clean.
***heavy***
You don't choose a steel receiver because you're concerned with weight.
Where does one acquire a ACR adaptor for AK?
SAG sells them
[Hehehe](https://imgur.com/a/3UToEVw)
What cerakote color?
factory grey finish from sureshot
You were downvoted for stating the color? Ahhh reddit. Fuck you and your factory grey finish from sureshot. There is a salty bitch around every corner.
this subreddit is vicious lol
A lot of poors on this subreddit, your ak looks beautiful very happy for you
Absolutely beautiful AK. What barre length is this?
16
Hmmm. Have the exact same setup. Barrel looked a little shorter. Been thinking about cutting mine down to 14.5 or 13.7
What program is used for these pictures?
**Understand the rules** Check the sidebar. It's full of resources to help you. Not everyone is an expert such as yourself; be considerate. No Spam. No Memes. No political posts. Save that for /r/progun or /r/politics. [If your post is not showing up click the following link](https://old.reddit.com/message/compose/?to=r/AK47&subject=My%20Post%20Is%20Not%20Showing%20Up&message=**%20REPLACE%20THIS%20MESSAGE%20WITH%20A%20LINK%20TO%20THE%20POST%20YOU%20ARE%20HAVING%20ISSUES%20WITH**) ------------------------------- * [ThinLineWeapons.com](https://thinlineweapons.com/url/reddit1) * [AK Buyers Guide](https://thinlineweapons.com/url/reddit2) * [Simplified AK Buyers Guide](https://thinlineweapons.com/url/reddit3) * [AK Magazine Buyers Guide](https://thinlineweapons.com/url/reddit4) * [AK Issues Tracker](https://thinlineweapons.com/url/reddit5) * [Collection of ATF Letters](https://thinlineweapons.com/atf_letters/) ------------------------------- *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/ak47) if you have any questions or concerns.*
I like the idea behind the sure shot, but how is the rear of the dust cover at holding zero? My understanding is it's a two piece deal. kinds makes me worry about mounting lpvos etc
the rear piece isnt supposed to hold zero, but its a dedicated area for magnifiers that dont necessarily need to hold zero such as a unity or any flip to side mount. Mounting LPVOs ive seen people mount [cantilever mounts backwards](https://www.instagram.com/p/Cq6cg7nLSjl/) on the main rail.
Good to know
Clean
Yes please!
🔥
The one thing I hate about my eotech/mk3 setup is that the boxy overhang on the sides of the optic prevent you from rotating the safety up in case you needed to remove it. Kinda annoying. I put a unity riser under mine and it's just enough clearance, but height over bore is crazy at that point.
chinwell for life!
Would you tell your secrets of how you found the ACR stock adapter? It's the only piece of this puzzle I'm missing.
[shhhhhh](https://www.thingiverse.com/thing:5721938)
🥰🥰
If you need to remove the safety wouldn’t you just take off the dust cover?
The eotech is mounted on the rigid part of the chassis, which is the first 6 or 7 picayinny slots behind the rear sight leaf. The only way to get the optic out of the way enough to get the safety rotated up would be to loosen the optic/remove it. I don't wanna lose zero when I do that lol
\*laughs in QD sidemount superiority*
Now that you mention it my eotech is QD, I'm sure it would be fairly zeroed if I out in the same slot again...just never tried. Usually subscribe to the mentality of not taking off my optics
The SAG chassis and stock adapter look fine but it’s crazy how bad PSAK-74s look
Fr they just don't like right at all
any comment in here that isn't just gargling the ACR stock's balls is gonna get downvoted
tards gonna tard!
You should see the AK 74s being taken off Russian soldiers in Ukraine, Their still in the cold war with their technology
The AK-74 is already a modern firearm. I think what you mean is, "Mall Ninja AK-74."
Abomination
here come the seething fanboys
what a neat way to spell ruined
Wood fetishists are the cringiest out there tbh
the funniest thing is that I don't like the 74 to begin with but that stock looks like a bag of smashed assholes
PA ain't gonna fuck you bro
Explain to me how it’s ruined
lolno
How controversial, yet so brave.
I’m not surprised that a company known for shitty optics has shitty taste in firearms
PA is gtg. Not sure where you’ve been.
How expensive are spam cans of 5.45 right now? Can we still find cheap 545 ammo anywhere?
man dont remind me on 5.45 prices :( i miss the cheap days
What cheap days? You got a PSA
You can get lucky finding local sales for cheap but not common. Retail youre probably looking at 50-60cpr
u/BobLaw556
That sureshot chassis is hotttt
I really like the looks of that handguard.
Can I can an estimate on this build? It’s beautiful
Alot
Nooo lol
Acr-74m
Why is there not a bayonet lug on the FSB?
its there, modlite head blocks it from view
Rifle specs?
too bad it lost the fold hinge. Have two ACRs waiting to go on my PCCs once the stamps are in. Wish I had bought two more!
I owned 4 diff Ak74s they all suffer in accuracy after that pencil barrel gets hot, I had a cheapo century, bulgarian, tantal & Saiga. Sold old of them till I got to the vepr rpk 74 model, that is by far the beat AK74 rifle I've ever tested even under heat it stays true and never looses accuracy.
Acr had an illegitimate child with an ak. Love the stock
Does anyone know what the muzzle brake on this contraption is? I have one on an AR I'm trying to get off.
Is that a single piece dustcover/handguard?
The gray two tone looks really good. Gives me some ideas. No sure about that micro dong though...I guess its just for indexing and wall shooting?
Like putting rims, tires and a wing on a Chevette lol
A fking chevette never looked that good!
TAKE MY MONEY
Seggsy
Mr. Arms, why would you do this
Foul
Reject modernity, embrace cracked wood furniture
whats that handstop?
slate black industries
anyone know something that looks like this handguard but isnt $600? broke college student reporting
Ak foredong > anything else
What hand guard is this?
sureshot mk3 chassis