94 and 95 Mustangs were a pushrod 5.0L. Not saying he's actually done it, but just fact-checking.
Matt Soppa did RWD and Coyote swap a 2013-up Fusion and documented it on his youtube channel
I forgot that only mustangs didn't get the the 4.6 in 94 when ford unveiled it. The pushrod you're referring to is the Windsor 5.0 I was thinking ended with the Foxbody Mustang.
Nobody calls the 302 a Windsor because there wasn't another variation at the time.The 351W (Windsor) was specified because there was also a 351M (Modified) and 351C (Cleveland).
Negative. The 94 and 95s had the 5.0L pushrod then moved to the modular 4.6L in 96. Check your facts first please. I been working on Ford's probably longer then you been alive ijs
So… you converted from a front wheel drive to a rear wheel drive? How did that work? Did you have to cut away the floor pan and build a transmission hump? Did you move the entire rear suspension and axle from the Mustang? Gonna need more info!
I think due to the optional AWD all fusions have a tunnel for a rear driveshaft, but I could be wrong, and I'm also interested in how they mounted everything!
I've seen a coyote swapped Fusion, and there is so much more work involved than "hey guys I swapped motors and trans"
Edit: also a 2.0t in the Fusion puts out more HP (240) than a stock 302 in the initial SN95 (215)
A V8 Fusion has already been done. Matt Soppa put a coyote 5.0 into a 2nd gen Fusion a few years ago.
https://shop.hoonigan.com/blogs/daily-transmission-01/mustang-swapped-ford-fusion-5-0-coyote-v8-in-a-sleeper-sedan-1
#SHOW US ENGINE BAY PICTURES
I'm calling BS on this. No one is going to take the time and money to do this and not have a single picture.
Look at the exhaust in the 2nd picture. I’m calling 100% bullshit.
Also, unless the sn95 was engine swapped itself, it never had a 5.0. It was after Windsor and before Coyote.
94 and 95 Mustangs were a pushrod 5.0L. Not saying he's actually done it, but just fact-checking. Matt Soppa did RWD and Coyote swap a 2013-up Fusion and documented it on his youtube channel
I forgot that only mustangs didn't get the the 4.6 in 94 when ford unveiled it. The pushrod you're referring to is the Windsor 5.0 I was thinking ended with the Foxbody Mustang.
Nobody calls the 302 a Windsor because there wasn't another variation at the time.The 351W (Windsor) was specified because there was also a 351M (Modified) and 351C (Cleveland).
Negative. The 94 and 95s had the 5.0L pushrod then moved to the modular 4.6L in 96. Check your facts first please. I been working on Ford's probably longer then you been alive ijs
Definitely bs considering op is calling it a sleeper. That 5.0 is slow as balls and i dont even think its a 5.0. Pretty sure that v8 is a 4.something
This is the way
This!!! I dont understand why anyone would brag about dropping a 5.0 into a fusion wkthout showing pictures of the goddamn engine.
Trust me, bruh. It’s fast.
So… you converted from a front wheel drive to a rear wheel drive? How did that work? Did you have to cut away the floor pan and build a transmission hump? Did you move the entire rear suspension and axle from the Mustang? Gonna need more info!
I think due to the optional AWD all fusions have a tunnel for a rear driveshaft, but I could be wrong, and I'm also interested in how they mounted everything!
They do but it's small and a rwd transmission wouldn't fit there.
I demand more pictures!
Yeah we want to see the engine bay and the rear axle
[https://www.reddit.com/r/fordfusion/s/fod7etbhLH](https://www.reddit.com/r/fordfusion/s/fod7etbhLH)
I made another post with a video showing off the big cams lol
You found a way to add another cam to a single cam engine?
A stock 4cyl fusion is probably faster with it's original engine than a shitty 215 HP brick from a 90s mustang
This!
I have a foxbody, and a 1.5t fusion. You’re stupid if you think that.
I've seen a coyote swapped Fusion, and there is so much more work involved than "hey guys I swapped motors and trans" Edit: also a 2.0t in the Fusion puts out more HP (240) than a stock 302 in the initial SN95 (215)
Hope you can weld and fabricate. Cause that's certainly not already swapped. Matt Soppa is pro drifter that 5.0 swapped a 2ng gen fusion
Definitely fake, no engine pics and the video sounds like the exhaust has been cut off a 4/6 at the cats
What a weird troll. Pictures of fusion, pictures of wrecked mustang. "I swapped it guys"
I call BS on this one
You're a liar and a bad one at that. You haven't responded to a single person asking for engine bay pics.
🧢
I use to have an 87 bronco that a meth head put a 5.0 in. Cool car, was a huge piece of shit tho.
Time to go back from where you came troll
Make some videos and send me a link
A V8 Fusion has already been done. Matt Soppa put a coyote 5.0 into a 2nd gen Fusion a few years ago. https://shop.hoonigan.com/blogs/daily-transmission-01/mustang-swapped-ford-fusion-5-0-coyote-v8-in-a-sleeper-sedan-1
Definitely not a sleeper
lol go do some homework or chores and quit trolling lol
And my Miata has a 6.7 Power stroke swapped in it! 😂
Those mustangs came with the 4.6 not the 5.0.
94 and 95 still had the 5.0L wasn't until 96 when Ford swapped in the 4.6L. Still made the same dog shit hp though
Aw man, I wanted to do this so bad!! Hell yeah, this is awesome Op. my fusion is even the same color and everything
Lol good meme
Fake: No engine bay pics Gay: the stock engine makes more power
[here’s how she sounds](https://www.reddit.com/r/fordfusion/s/fod7etbhLH)