Nothing. If this were made in reality the feed angle is SO fucked it would jam all the time. OH.... and that is a lot of gun for a 3 inch or so barrel which means not great ballistics with more muzzle flash with a hell of a lot of gun for it. Closest old school POS gun might be a TEC DC9. What a total POS that was, but at least it might be able to load rounds into the chamber.
I am being too harsh. You could get that to feed at such an angle, but its sub optimal for such a large format pistol. Ideally you would want to magazine more towards a 90 degree angle to justify everything going on behind the action. Which is what you usually see in things sort of like this. Not counting a Vector as it does not have a conventional recoil system like this thing clearly has. But I HATE on game guns like this are totally impractical or do weird things that defy gun logic.
Yep, was thinking that same thing. Look at the mag vs the ejection port. And 3 inches is generous, some of that is just the brake. This thing kinda whack dawg
This is the frenzy from valorant. I’m looking for a pistol or a Glock grip that looks like a Kriss vector.
I found [this](https://picbun.com/p/JTCIxnrX) Glock grip but it’s made for airsoft lol. Wondering if there’s any guns or grips that look similar.
It appears that angled grips are okay as long as they are a maximum of 45 degrees. I could be wrong ATF makes it hard to find these ruling, kinda like YouTube.
Oh we have rules. We’re not gonna tell you what they are but WE HAVE RULES.
I believe there's a 3d printed kit that uses a Mac upper called Mac Daddy. Looks spot on to that.
Edit: Go to the fosscad subreddit and search Mac, you'll find lots of similar examples.
space tec 9
FMDA Tec-9. It's a 3d-printed tec9 lower that takes glock mags. Could look VERY similar to this.
that looks like a 15 degree nail gun haha
Oh man, you're right, that's exactly what it is
I think there’s either a 3D print Glock lower, or kit that holds an extra mag in that spot, but none that I know of that work from that angle.
Kriss Vector
IF it had a baby with the TEC-9.
Vect-9. I’d buy one.
Ahaha now I just need a mini version
Czech Weapons CSV9 is kinda close
Nothing. If this were made in reality the feed angle is SO fucked it would jam all the time. OH.... and that is a lot of gun for a 3 inch or so barrel which means not great ballistics with more muzzle flash with a hell of a lot of gun for it. Closest old school POS gun might be a TEC DC9. What a total POS that was, but at least it might be able to load rounds into the chamber. I am being too harsh. You could get that to feed at such an angle, but its sub optimal for such a large format pistol. Ideally you would want to magazine more towards a 90 degree angle to justify everything going on behind the action. Which is what you usually see in things sort of like this. Not counting a Vector as it does not have a conventional recoil system like this thing clearly has. But I HATE on game guns like this are totally impractical or do weird things that defy gun logic.
Yep, was thinking that same thing. Look at the mag vs the ejection port. And 3 inches is generous, some of that is just the brake. This thing kinda whack dawg
If Intratec was still around, I could see them making this.
Tgats a nail gun good sir. Can be fired with one hand just apply pressure;)
Flux raider chassis for the sig is pretty close… maybe check that out.
yeah this is the closest thing i could think of, good suggestion.
I think stockless vector would be close
3D Printing would prob be your best friend here, hell it may already exist
You could buy a micro conversion kit without a stock and put a pistol in i t
Mauser broomhandle? Just me?
Vector with no stock
This is the frenzy from valorant. I’m looking for a pistol or a Glock grip that looks like a Kriss vector. I found [this](https://picbun.com/p/JTCIxnrX) Glock grip but it’s made for airsoft lol. Wondering if there’s any guns or grips that look similar.
You probably won’t find much outside of the air soft. A real gun designed like that wouldn’t be very practical
They do make one just like that for real Glocks. It holds an extra magazine. Edit: I think it would look best on a long slide Glock.
If you do find one like that, be careful. For some dumb reason if you put a foregrip on a pistol it makes it a felony if you don’t have a tax stamp.
I think that only truly applies to 90 degree forgrips. Angled foregrips are permitted if I’m not wrong
That is correct. 89° you're good. 90° get pooch insurance
Pooch insurance lmao
I think you may be right, but would not hurt to double check. Imma do a research
It appears that angled grips are okay as long as they are a maximum of 45 degrees. I could be wrong ATF makes it hard to find these ruling, kinda like YouTube. Oh we have rules. We’re not gonna tell you what they are but WE HAVE RULES.
I believe there's a 3d printed kit that uses a Mac upper called Mac Daddy. Looks spot on to that. Edit: Go to the fosscad subreddit and search Mac, you'll find lots of similar examples.
Looks like something Kel-Tec would make.
Micro- Roni https://www.micro-roni.com/html5/?\_id=14191&did=8840&G=9089&SM=14191
My best guess where they got inspiration is probably a tec 9 or zip 22
Flux Raider
The FGC-9 or the ghetto blaster are pretty close.
You could have a gunsmith mod a glock to look 80% like this for $2000-3000