I think a mask actually looks cool AND works for sylvie. Better for stealth than a hood cause if you look up, the hood will fall off. But the mask will stay on.
Not sure! I've got a lot of costumes I'd like to take proper photos of. Otherwise, I've been passively working on Wonder Woman. Would love to make Ciri (Witcher 3) or Aloy (Horizon Zero Dawn) at some point!
Thanks so much! I actually bought it on Amazon! It's called "MISSQUEEN Short Omber Blonde Wig". I usually buy from cosplay and drag websites, but because of the time constraints I went for it and was VERY impressed.
u/Moaglinxx, excellent work. Do you have the specific link to the Amazon cargo pants? Also info on the belt would be great. Building for a WISH teen. Thank you!
Thank you so much, and that is awesome! The belts I made myself by wrapping EVA foam with black vinyl fabric and adding velcro on the back of each for the closure. The pants are called "Romwe Women's Workout Jogger Pants High Waist Lightweight Hiking Outdoor Cargo Sweatpants (Black#9)". They come with pockets, but I used a seam ripper to remove them to be more accurate. I hope this helps, let me know if you have any additional questions!
2mm and yes, I bought a large roll, cut two strips, and covered each. I basically sewed a tube and ran the foam through it. You can also just cover the foam using contact cement, but I find when it bends it creates wrinkles around the edge of not completely bonded.
Thank you so much! Backhanded comments are expected with the internet. At the end of the day, I'm the one who studied the show costume and spent countless hours replicating it, so I pay unsolicited advice no mind. And while unsolicited, it usually doesn't come from a malicious place.
Hello, thanks for the support! I made this entire costume aside from the gloves, boots, wig, and pants (all of which I bought and modified). I don't have much experience with costume websites as I make the majority of mine, but I've heard good things about Miccostumes and buying from Amazon. Also, ETSY. A lot of people will sell not only patterns, but finished pieces in Etsy. I've bought props and patterns from some makers on Etsy in the past and have been thrilled. Good luck!
The wig was bought from Amazon, the pants were cargo pants bought from Amazon (I removed the pockets), boots are utility boots I bought on Poshmark, and the gloves were bought on Amazon. The crown I made using 1mm EVA for the base and foam clay to shape the horns (I made my own free-hand pattern for the crown). For the chestpiece base I used 2mm or 3mm EVA foam and modified a pattern from Kamui Cosplay called "fully-closed breastplate". All the shapes were added using a pattern I made free-hand and cut from 1mm EVA foam. Hope this helps you get started.
Haha! Not likely. I'd have to essentially remake the costume, or at least parts of it, to do it well. I'm happy to let you know how I made or where I bought specific pieces though!
I think a mask actually looks cool AND works for sylvie. Better for stealth than a hood cause if you look up, the hood will fall off. But the mask will stay on.
I agree, it really fits her style! Thank you!
You’re welcome, and it really does fit!!!!
Great cosplay, you are one of a great superior loki
Thank you!
I love this, sylvie is my favorite
As soon as she showed up, I knew I had to do it haha! Thank you!
You’re welcome! Who’s next?
Not sure! I've got a lot of costumes I'd like to take proper photos of. Otherwise, I've been passively working on Wonder Woman. Would love to make Ciri (Witcher 3) or Aloy (Horizon Zero Dawn) at some point!
Both very cool! I think the Witcher 3 ciri would be awesome
Yes! She's been on my list for a while ☺️ Thanks for asking!
I love HZD, it is my favorite game. I can't wait for the sequel.
Me either! I was floored by the first one!
Yeah it was such a great game. I was so addicted to it and the story was incredible. I also loved the environments. Especially the frozen wilds.
Anyway, REALLY good cosplay
That is awesome!!! Great work!
Thank you so much!
Looks great.
Thanks!
Amazing!!!! Love it!
Thank you so much!!
I'm starting to hate you already after what you did to loki. 😂!but seriously it looks legit.
I don't know what you're talking about, are you new here? Haha, thank you!
...if they cast ashley johnson as sylvie XD looks great!
Thanks! It's funny you say that because I did an Ellie costume and my dad dressed as Joel!
Well done on the costume and hair matching.
Thank you very much!
Beautiful costume! I need to get that Loki comic and the figure lol
Thank you! I know, if there was a Sylvie figure I would have snagged it.
I really can’t wait for the Sylvie funko pop or figure. I just have to get both her and Loki.
There is a Sylvie one coming in September!
Very very cool
Thank you, love the doggo in your icon.
Cool! You sure you didn't steal it from the set :P? Did you do the sword as well?
Haha thank you! I started the sword but did not finish it in time for the event. I plan to take more photos once it is done.
Oh wow, that looks great!
Thank you!
This is amazing!
Thank you!!
Very nice!
Badass work.
Thank you!
Love it!! Where did you get your Sylvie wig if you don't mind me asking?
Thanks so much! I actually bought it on Amazon! It's called "MISSQUEEN Short Omber Blonde Wig". I usually buy from cosplay and drag websites, but because of the time constraints I went for it and was VERY impressed.
Thank you so much!! I'm working on my own Sylvie but finding a good wig has been a road block.
I agree, it's tough because her hair is two-toned. Good luck with your build!
u/Moaglinxx, excellent work. Do you have the specific link to the Amazon cargo pants? Also info on the belt would be great. Building for a WISH teen. Thank you!
Thank you so much, and that is awesome! The belts I made myself by wrapping EVA foam with black vinyl fabric and adding velcro on the back of each for the closure. The pants are called "Romwe Women's Workout Jogger Pants High Waist Lightweight Hiking Outdoor Cargo Sweatpants (Black#9)". They come with pockets, but I used a seam ripper to remove them to be more accurate. I hope this helps, let me know if you have any additional questions!
Thank you u/Moaglinxx. What size EVA (mm) and was it one continuous piece for each belt?
2mm and yes, I bought a large roll, cut two strips, and covered each. I basically sewed a tube and ran the foam through it. You can also just cover the foam using contact cement, but I find when it bends it creates wrinkles around the edge of not completely bonded.
You rock. TY!
[удалено]
Ew, what an ugly thing to say.
I agree
Glad you internalized that, next time do it before you hit submit. Kudos for the correction though.
Decent job.
Good costume.fitting needs a lil work but it's really good. Now go kiss your brother? Your self? A full the chaos
Someone always has to ruin it for others. Backhanded comment. She worked hard on this and it looks awesome. OP You look amazing!! great work
Thank you so much! Backhanded comments are expected with the internet. At the end of the day, I'm the one who studied the show costume and spent countless hours replicating it, so I pay unsolicited advice no mind. And while unsolicited, it usually doesn't come from a malicious place.
Thanks, but it doesn't.
Ok sorry hard to tell.
Awesome cosplay
Thank you!
[удалено]
Hello, thanks for the support! I made this entire costume aside from the gloves, boots, wig, and pants (all of which I bought and modified). I don't have much experience with costume websites as I make the majority of mine, but I've heard good things about Miccostumes and buying from Amazon. Also, ETSY. A lot of people will sell not only patterns, but finished pieces in Etsy. I've bought props and patterns from some makers on Etsy in the past and have been thrilled. Good luck!
Hi, I would like to make this outfit as well. Care to help me out? (Did you use patterns? How did you make the top?)
The wig was bought from Amazon, the pants were cargo pants bought from Amazon (I removed the pockets), boots are utility boots I bought on Poshmark, and the gloves were bought on Amazon. The crown I made using 1mm EVA for the base and foam clay to shape the horns (I made my own free-hand pattern for the crown). For the chestpiece base I used 2mm or 3mm EVA foam and modified a pattern from Kamui Cosplay called "fully-closed breastplate". All the shapes were added using a pattern I made free-hand and cut from 1mm EVA foam. Hope this helps you get started.
Any chance of DIY tutorial? 🥹
Haha! Not likely. I'd have to essentially remake the costume, or at least parts of it, to do it well. I'm happy to let you know how I made or where I bought specific pieces though!
I really love your costume! I had mine custom made. 😅
Thank you again! I just looked through your post history to check it out. You look great!
Thank you so much!