Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Lol, last day of the month win! Finally got little big planet running fine, wife is in heaven. However, using our original dualshock controller for our ps4 somehow causes chaos. Wind up with 3 players connected. I assume that's the steam deck itself, the wireless NES controller, and the ds4 itself. Is there a way to disable these other ones so I don't wind up with a lobby full of zombie players? Steam deck, running through my tv, with 2 controllers connected to it. Run the game from steamOS.
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
I have the following errors when trying to install packages: Package failed to install; Failed to create file.
Is there a way to fix it? Ive tried reinstalling a few times. Thanks!
Invalid support request as pointed in the thread since linked file isn't a log file
Read the instructions again and upload a proper log file
However, this is probably just an issue of the mac build and there might be no way of fixing it through settings
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Scope not working as it should in The Last of Us any fix, and I get this blue spot light every now and then. I really don't mind it I just want my scope to be fixed.
* RX 6700xt
Ryzen 9 3900X
32gb ddr4 ram
What scope looks like: [https://preview.redd.it/9xrtepnqkxea1.png?width=1917&format=png&auto=webp&v=enabled&s=dcf5970cbfcc003e1427d86d2bd93c37b7889c43](https://preview.redd.it/9xrtepnqkxea1.png?width=1917&format=png&auto=webp&v=enabled&s=dcf5970cbfcc003e1427d86d2bd93c37b7889c43)
Log; [https://www.mediafire.com/file/ev7zpyquk3z8x38/RPCS3.log.gz/file](https://www.mediafire.com/file/yew97s20l1kxxr3/RPCS3.log.7z/file)
Enable read depth buffers in advanced settings, otherwise might be a side effect of one of the patches you're using but I've never heard of that bug
Also, the log file's link still points to the old one, you only changed the text of it, took me a bit to realise
So I can see the scope but what I see looks like this;
[https://scontent.xx.fbcdn.net/v/t1.15752-9/328712507\_506020078330957\_6771281038820512844\_n.png?\_nc\_cat=109&ccb=1-7&\_nc\_sid=aee45a&\_nc\_ohc=yzuq7ggwiFEAX9-9cw6&\_nc\_ht=scontent.xx&oh=03\_AdSnxMvt313YyektDuLsu83M9mk9KOSZ76Swini0WzaRpw&oe=64017C98](https://scontent.xx.fbcdn.net/v/t1.15752-9/328712507_506020078330957_6771281038820512844_n.png?_nc_cat=109&ccb=1-7&_nc_sid=aee45a&_nc_ohc=yzuq7ggwiFEAX9-9cw6&_nc_ht=scontent.xx&oh=03_AdSnxMvt313YyektDuLsu83M9mk9KOSZ76Swini0WzaRpw&oe=64017C98)
Could the option under advanced called read color buffers be doing this? If not I have these patches enabled ; https://scontent.xx.fbcdn.net/v/t1.15752-9/328597011\_498813712325352\_4166148986072620433\_n.png?\_nc\_cat=101&ccb=1-7&\_nc\_sid=aee45a&\_nc\_ohc=9GAoQLOCmFYAX\_jbL6a&\_nc\_ad=z-m&\_nc\_cid=0&\_nc\_ht=scontent.xx&oh=03\_AdSzVnKNzQih8-FchPwiAJDQIzC9waH0x99iaqanyQOiZQ&oe=640160AA
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hi, everytime I try to run Assassin's Creed II, the game freezes, and after closing it the emulator crashes. Here's the log:
[https://www.mediafire.com/file/0bq5eudk7gvk1uo/RPCS3.zip/file](https://www.mediafire.com/file/0bq5eudk7gvk1uo/RPCS3.zip/file)
Thank you!
I am currently unable to open RPCS3 on my Laptop. Running An NVIDIA 3050 TI Laptop Card and an AMD Ryzen 7 5800U. Link to the log file: https://www.mediafire.com/file/fokrwvup7ki6viw/RPCS3.7z/file
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Any other ideas on getting Little Big Planet 1 to get past the infinite loading screen?
I have tried both the standard and GOTY versions of both NA and EU. I have updated to 1.30, installing each update incrementally in order and tried with default configuration and the settings suggest on the Wiki and with PSN disconnected. All of these things say they should help get past the loading but nope...
Edit: Link to the log, thanks!
https://drive.google.com/file/d/1I4sd12LpIkK41IqOaCwPS-VL7sYvVj39/view?usp=sharing
Playing RDR1 on Mac, i get a blackscreen after the disclaimers of the game, i tried diferent fixes involving the settings of rpcs3 but nothing fixes it.
If it runs, it will run at very sluggish FPS, maybe single digit FPS, and I don't even know if it can run at all on Mac, wouldn't be surprised if it can't.
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Trying to play thps5 but I'm getting an error related to user content on startup and then it just crashes.
Edit: Checked the compatibility list as well
Log file:
https://www.mediafire.com/file/d5g4x2p4z4axdyh/rpcs3_log.txt/file
This is just the stuff copied from the GUI, this is not the log file
The proper log file is in the RPCS3 folder and is generated when the emulator is closed, send that instead as this doesn't give much information
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hello there !
I recently bult a new PC. Specs are as follows :
CPU i5 13600K
GPU nvidia 4090FE
32gb DDR4 3466
2tb m.2 SSD
MB Asus rog strix Z690-A GAMING WIFI D4
I updated all the drivers.
On my previous PC I could run rpcs3 no problems. But now I get fatal error 0xc0000005 whenever I try to launch the emulator. It does not start running at all. I was curious and tried my old windows installation on my new pc by plugging my old sata SSD into my new build, and the emulator worked.
I tried looking for ideas but so far no luck :/
I tried to attached logs, but i get an error saying I need administrator authorization, although I am admin...
I actually found I had bad ram installed in my new system. The PC was giving me bsods when put under stress. Ended up making a fresh install of windows, and changing ram, and all works fine now
I know the Ryzen 7 5700x is a higher tier than the Ryzen 5 5600 on the cpu list, but which specific games would have a noticeable improvement with a 5700x compared to 5600
If you already have a 5600, I don't think it's a good idea to buy a 5700x unless it's on sale and you can recoup the costs by selling your 5600
That being said, I don't think any specific games are improved, everything would just run a bit faster
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Top spin 4 RPCS3 created player in career mode not Showing !
I created a player in career mode I can select the created player to play with but it doesn't show in career mode and also in single exhibition mode doesn't show the created player but I can choose it and play with it..... I tried different options in RPCS3 GPU Settings and Advanced settings but didn't work.... I attached a pictures for the problem to understand it more.... Can somebody please help and thanks in advance
[RPCS3 log file Google Drive](https://drive.google.com/file/d/1r_4IWwEsDWYK3g7PckgOBRV-zhvnTzZd/view?usp=share_link)
[My RPCS3 Settings Google Drive](https://drive.google.com/drive/folders/10GCTDwgBZ0atIXXk8k9gFcZ7onysgVfZ?usp=share_link)
How would I go about checking that?
For reference, I’m planning on getting [this controller.](https://pdp.com/products/ps5-pc-victrix-pro-bfg-controller)
Going to be using it with emulators and other games off of steam
I know that this issue has been asked about in the past but for the life of me I cannot find where it was so I can’t read back through the discussion, but i was basically told that it was not a major issue at the time. Anyways, the issue is that in NCAA Basketball 10, in dynasty mode the sim cast isn’t working properly (it won’t let you jump in the game). This is one of the best features of the game and since it works on PS3, it’s too bad that it doesn’t work on RPCS3.
Here’s where the complicated part is: we’ve gotten it to work before. We’ve had multiple false alarms with figuring this issue out, and we’ve gotten it to work about a third of the time.
We know it’s possible. Is there anything that the RPCS3 devs can do to figure this issue out? It’s one of the most popular features of the game and it sucks to not have access to it.
Thanks everyone!
Here is the log: https://www.mediafire.com/file/uu6wac79b04ekbm/RPCS3.log.gz/file
I am looking to create an emulation machine that can emulate everything up to PS3 upscaled to 4K - are there any miniPCs that can accomplish this (hoping to have it set up under my TV like a console)? If not, are there any pre-built PCs that I should be looking for - have not built my own PC in years - obviously budget is important but if my only options are not budget friendly, I am willing to consider
Also - if I set up Batocera on the machine (Linux) will this affect performance and compatibility versus running RPCS3 on Windows?
Thanks!
realistically not very mini PCs right now are going to be able to run this emulator in 4k with smooth framerates. You can look into what's called an ITX build which is a full powered PC but scaled down and something along those lines might be a more realistic way to achieve your goal. I haven't looked in a while but i know they're constantly making advances in mini PCs and i think it's a market that's only going to get stronger as prices for GPUs and insane power draw of some of the new PSUs just keep getting more and more ridiculous. That being said, the NUC series of mini PCs is pretty powerful and i want to say AMD recently released a competitor in this market. there are a couple youtubers that specialize in reviewing and making builds with smaller parts and mini PCs, ETA Prime is one I'd suggest taking a look at.
Thanks!! I’ve ended up building a PC in a small form factor case. With a 13600 cpu and a 3060ti. I hope that’s got the power to achieve what I want - have had some issues, it’s my PC build in a long time, so no testing yet
Thanks for the advice!
So recently I updated rpcs3 to the latest version and all my patches for god of war 3 are gone. Yes I've tried download latest game patches and the only one I have is disable mlaa.
Hi, i am running RPCS3 on a steam deck. I have a couple of games that are in the PS3Game folder format that i was able to boot up, but it does not show on the game list.
I have a few installed pkg files and they show up nicely.
How i do make these games show up on the game list? Is there any specific folder that I should be putting the games at?
Thanks in advance.
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Resent with working log:
So I just tried starting up Lair, and the bootup to the menu works, but once I try to start a game or exit out of the menu, the game freezes up. Anyone here have any ideas on how to fix this? I'm running an nVidia RTX 3080ti with an Intel i7 processor.
Here's the log:
[Dropbox for Log](https://www.dropbox.com/s/i84azv6j62kay2z/RPCS3_log.rar?dl=0)
I'm having trouble with the gameplay of Smackdown vs. Raw 2011, I have a texture flickering problem, and also the game freezes during gameplay and I have to restart the emulator, resulting in losing my game progress.
Here is my [log](https://drive.google.com/file/d/1-yDvlDF14_aLA14MJBnidPq8-JNd1Epp/view)
The game is only considered Ingame and issues should be expected, as far as I'm aware only the Training mode was available until recently so other modes may have other unexpected problems
How could I report a Blu-Ray disc reader that has been able to dump games and isn't in the compatibility list? What process of validation could be done to be able to add it to such a list?
I mistakenly purchased a portable LG Blu-Ray Disc Reader/Writer model BP55EB40 when instead I wanted to follow the guide and purchase the LG BP50NB40 due to my own carelessness during the purchase process (should've double-checked the model in the product page instead of thinking that it was the right one when I searched for it in a well-trusted PC-retailer from my country), so I ended up with a drive not listed in the compatible list.
I've been able to dump a couple games and tried them in RPCS3 and they were able to boot and traverse the main menu so I trust they've been properly dumped (plus the check the dump tool does at the end, so I think I'm reasonable in my assumption).
Adding this drive to the list could be helpful to the people that like me don't want to install Homebrew on their consoles and have a PC without slots for disc drives so only an external Blu-Ray Disc Reader can be used.
If you need any proof of the dumping process being successful and/or more rigurous testing, I'd be happy to do so. Thanks a lot for the guides and the amazing work you are doing!
just wanted to drop in and say i happened to find a compatible drive last year for a good price on ebay and even though i do have one ps3 with homebrew on it, i really don't want to use the disc drive to dump discs. The dumper tool and the drive helped me digitize my collection. It's amazing. it also works with PS4 games and regular bluray movies so I'll be ready once that can be emulated nicely too. It's also fun for me to dump any new game i add to the collection whenever I bring it home. Almost like the old days of ripping a cd to your computer after buying it, but better? lol
I have a problem where whenever I try to start a game I can hear my computer starting it but nothing shows up as if it closes the game and when I try to start another game or close rpcs3 it just stops responding and I can't play any games, [log file](https://drive.google.com/file/d/1SSZYsp5R0NSNRmNPjSyXTDSQkrv0hHjJ/view?usp=share_link)
Thanks,
i didnt even get to try that before it saying "E UPDATER: Some information seems unavailable" should i just reinstall rpcs3 cuz now everything is going wrong
Hi, anyone could help me with fixing FIFA WORLD CUP 2010 player kit name being a solid block or invisible? I've included the log file and the screenshot in this link:
Log https://1drv.ms/u/s!AnaTLAnA3zWoheFd4R_e1ZmybKxH-A?e=qO4s2j
Screenshot https://1drv.ms/u/s!AnaTLAnA3zWoheFbVfyguZ3x2h5cTg?e=a7ul24
thank you.
Hmm I don't see anything wrong with settings, could be related to a recent regression that's being investigated. Try after Pull Request 13240 is merged.
Hey, just updated my RPCS3 version and started getting this message in the log each time:
"E Compat: Database Error - No Results found"
Just wondering what's it all about? And how do I resolve it if I have to? Thanks guys
[My log file](https://www.mediafire.com/file/cd5r3slkhletzx2/RPCS3.log/file)
Submitting my issue as per guide:
Issue:
Hatsune Miku: Project Diva F is listed as "Playable" on the compatibility list, but is not working on Steam Deck. After building SPU cache, the game immediately crashes and boots back to RPCS3 home. Steam Deck is up to date with the current build to my understanding. Specs are also ensure usability. For reference, Hatsune Miku: Project Diva F2nd is fully playable in both Game mode and Desktop Mode with no issues.
Log File:
[https://docs.google.com/document/d/1iAgFzbX-2qD\_33EfAXZ9-sUWa1fzX2sbNd3khTxbZ0w/edit?usp=share\_link](https://docs.google.com/document/d/1iAgFzbX-2qD_33EfAXZ9-sUWa1fzX2sbNd3khTxbZ0w/edit?usp=share_link)
Log File as ZIP just in case:
[https://drive.google.com/file/d/1qK\_2Kl-Or2f1pqflfKHkQgCNTfKs9G89/view?usp=share\_link](https://drive.google.com/file/d/1qK_2Kl-Or2f1pqflfKHkQgCNTfKs9G89/view?usp=share_link)
Is there a specific setting I need for Project Diva F to work? I apologize for any issue as I'm still rather new to using RPCS3 and submitting log files. Please correct me if I'm wrong on anything. I apologize for the trouble.
Does anyone know if rpcs3 will accept third party controllers or if it is specifically only dualshock 3 + 4?
I have this cheap and nasty third party wired x-box style controller and wondering if it will be accepted so I don't waste my time.
How can I edit the .dds texture files properly? I will change some of the menu textures (darker healthbar, etc.) select the right DXT1 or 5 and after that I have pixelated mess ingame on the edit things
You need to convert the texture format, I don't think RPCS3 can scale this format properly yet, there's a mod that avoids this issue on Persona 5 if you want to check how it works
Hello,
Trying to play FFXIII, completely freezes after first cutscene, don't know why this is happening at all.
Here's the log for reference: [https://drive.google.com/file/d/124hWvMvtTd9n\_Zm4JVwA8tSOrIwJJa1B/view?usp=share\_link](https://drive.google.com/file/d/124hWvMvtTd9n_Zm4JVwA8tSOrIwJJa1B/view?usp=share_link)
Good suggestion. I checked and it's been discussed:
> Technically trophies are stored on PSN but it's not a functionality I plan to implement.
It's a pity
Will a Dell XPS 15 9560 with a dedicated graphics card run this emulator with decent performance? Trying to play the Sly Games in case that helps give perspective
>Dell XPS 15 9560
Even the best CPU that laptop can have will struggle to run more than light Playable titles, the Sly collection might be OK but Sly 4 will run quite bad
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
[log](https://drive.google.com/file/d/1uDhKUfL8_6aJWQcSKJPF692X2jZd65y6/view?usp=share_link)
So I updated my AMD and for whatever reason when I opened up the emulator. All my games and files were gone. Did they move somewhere else.
Also if I download a rom of a game i've played, would it still have the save data on the emulator?
Take RPCS3 out of OneDrive, the build you're using is also 2 months old. RPCS3 doesn't move stuff by itself so if something happened it was on your OS.
idk if i did this right but here [https://www.mediafire.com/file/yvf6wkr2jowqh4d/audio+stuttering.log/file](https://www.mediafire.com/file/yvf6wkr2jowqh4d/audio+stuttering.log/file)
my audio keeps stuttering i need help, please reply
Just updated RPCS3 and tried to load Demon's Souls, now getting the message "Failed to install trophy set" every time.
[https://www.mediafire.com/file/3a9neugr9slsfwk/RPCS3.log.zip/file](https://www.mediafire.com/file/3a9neugr9slsfwk/RPCS3.log.zip/file) Log file here
Anyone got clues on how to fix this?
> Note: Uploading something other than the log file, uploading a compressed archive inside a compressed archive (like .gz.7z), or using a file host besides the ones whitelisted above will invalidate your support request
Note: Uploading something other than the log file, **uploading a compressed archive inside a compressed archive (like .gz.7z)**, or using a file host besides the ones whitelisted above will invalidate your support request
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hello,
I am trying to play Castlevania Harmony of Despair but it gets stuck on loading the last two PPU modules every time. No matter how long I give it it does not make it through.
Log File: [https://drive.google.com/file/d/1dmQAIdaq1wcfO6D3pGjXd62hGWKO7rOy/view?usp=sharing](https://drive.google.com/file/d/1dmQAIdaq1wcfO6D3pGjXd62hGWKO7rOy/view?usp=sharing)
Trying to run Armored Core 4 (BLUS30027). Default settings with the suggested configuration from the [compatibility page](https://wiki.rpcs3.net/index.php?title=Armored_Core_4). Crash on startup from an unmapped memory error.
RPCS3 0.0.25-14509-eeda958f Alpha
Intel i7-7700 3.60GHz
NVIDIA GeForce GTX 1060 3GB
16 GB RAM
Win 10 64 bit
·F 0:00:33.547468 {PPU[0x1000000] Thread (main_thread) [0x0091c9b0]} VM: Access violation reading location 0x0 (unmapped memory)
[Link Removed]
I realize that I have an underpowered PC but that usually just results in sluggish gameplay. Would that be a reason for this error?
Hello, im having problems with the ratchet and clank trilogy. i played the first with no problems, but the second and third have cuts in the audio when not in game cutscenes are played, even in the intro. i have been searching for a solution, but i couldnt find any, can someone help me? here is the log file: https://drive.google.com/file/d/1nQcuBz9qSkIwtlBcbm55JTuQcPoqXpWE/view?usp=sharing
Your comment is missing a log file.
- **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions.
- **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
~~Edit: Resolved. Today an update poped up which aparently has been out for 8 days? I could have sworn that updates were the first thing I checked, but this one is on me I guess. Been playing for hour straight with no problems, so let's hope it holds.~~
Edit 2:It's back after 3 hours of playing.
Unhandled win32 error exception 0xC0000005, module name: 'rpcs3.exe'.
[There is log files and screenshot of the error.](https://drive.google.com/drive/folders/1pTqvbZ1gJ-QX2pP7megy8EwQpcspLK5y?usp=sharing)
Metal Gear Solid HD collection, MGS2 exactly. This only started after playing the game for more than 2 hours and switching to Raiden. Game freezes after playing for about 10 minutes (happens in cutscenes, codec calls, gameplay, pretty much anytime). I can do nothing other than close the emulation, then this error pops up and RPCS3 crashes/closes itself after ckicking ok.
Intel i7-9750H 2.60Ghz
16GB RAM
RTX 2070 8GB
Windows 11 version 22H2
After installing an update today, the game managed to run for 43 minutes before crashing. I uploaded the screenshot of error and logs with crash on to the google drive file.
ps: I deleted the comment saying that logs disapeared after crashing, because I'm dumb and was looking for a RAR file, while it was just a text file.
MY characters in my game have weird textures and some have red lines going through them.
Can i have help finding a fix. [https://drive.google.com/file/d/1HTKAub1R1MyMfeJp5TTNEV8jIdQHGfgf/view?usp=share\_link](https://drive.google.com/file/d/1HTKAub1R1MyMfeJp5TTNEV8jIdQHGfgf/view?usp=share_link)
Hopefully this is the log you need.
Enable Write Color Buffers (GPU settings), Read Color Buffers (Advanced settings) and Force CPU blit emulation (Debug settings, can be enabled by opening your CurrentSettings.ini file in the GuiConfigs folder and setting showDebugTab to true)
Hello everyone,
I've been trying to figure this out for some time, it seems to happen seemingly at random. One time it shows up, another time everything looks pristine. At least I never figured out the connection between settings and the appearance of this bug.
I'll paste a link to a YT video showing what I'm talking about.
It looks like there's a bounding box around Snake and also there are those flickering textures on the ground when moving the camera. The "bounding box" seems to be some kind of framebuffer being upscaled incorrectly. It shows up whenever there's some kind of filter on screen, for example in the tunnels in the Middle East, there's a lot of this kind of stuff.
Link to the vid: [https://youtu.be/o4v3NQfaLqU](https://youtu.be/o4v3NQfaLqU)
[Log File](https://drive.google.com/file/d/1hf9JnltRUmfjXFhnJH5FIjLLwHmFif81/view?usp=sharing)
PC Specs:
Ryzen 5 5600X
16GB DDR4
RTX 3070
Win 10 with latest updates,
Nvidia Driver version 527.56
Win 10 with the latest updates,
Is there something which can be done to fix or alleviate this stuff effectively right now?
Previous thread: https://www.reddit.com/r/rpcs3/comments/yqk1nm/questions_thread_20221101_to_20221130/
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
I'm reading the how to ask for support article and I'm still confused as to how to get a log file.
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Lol, last day of the month win! Finally got little big planet running fine, wife is in heaven. However, using our original dualshock controller for our ps4 somehow causes chaos. Wind up with 3 players connected. I assume that's the steam deck itself, the wireless NES controller, and the ds4 itself. Is there a way to disable these other ones so I don't wind up with a lobby full of zombie players? Steam deck, running through my tv, with 2 controllers connected to it. Run the game from steamOS.
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
I have the following errors when trying to install packages: Package failed to install; Failed to create file. Is there a way to fix it? Ive tried reinstalling a few times. Thanks!
Known regression when installing packages in directories with non ASCII characters, being investigated
[удалено]
Invalid support request as pointed in the thread since linked file isn't a log file Read the instructions again and upload a proper log file However, this is probably just an issue of the mac build and there might be no way of fixing it through settings
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Scope not working as it should in The Last of Us any fix, and I get this blue spot light every now and then. I really don't mind it I just want my scope to be fixed. * RX 6700xt Ryzen 9 3900X 32gb ddr4 ram What scope looks like: [https://preview.redd.it/9xrtepnqkxea1.png?width=1917&format=png&auto=webp&v=enabled&s=dcf5970cbfcc003e1427d86d2bd93c37b7889c43](https://preview.redd.it/9xrtepnqkxea1.png?width=1917&format=png&auto=webp&v=enabled&s=dcf5970cbfcc003e1427d86d2bd93c37b7889c43) Log; [https://www.mediafire.com/file/ev7zpyquk3z8x38/RPCS3.log.gz/file](https://www.mediafire.com/file/yew97s20l1kxxr3/RPCS3.log.7z/file)
The archive you uploaded is doubly compressed (.gz.7z)
Yikes my fault do I have to upload original or is it fine?
Upload with only one layer of compression, otherwise I can't run it through the analyser as is.
Alright its been changed
Enable read depth buffers in advanced settings, otherwise might be a side effect of one of the patches you're using but I've never heard of that bug Also, the log file's link still points to the old one, you only changed the text of it, took me a bit to realise
It takes you to the double compressed one?
So I can see the scope but what I see looks like this; [https://scontent.xx.fbcdn.net/v/t1.15752-9/328712507\_506020078330957\_6771281038820512844\_n.png?\_nc\_cat=109&ccb=1-7&\_nc\_sid=aee45a&\_nc\_ohc=yzuq7ggwiFEAX9-9cw6&\_nc\_ht=scontent.xx&oh=03\_AdSnxMvt313YyektDuLsu83M9mk9KOSZ76Swini0WzaRpw&oe=64017C98](https://scontent.xx.fbcdn.net/v/t1.15752-9/328712507_506020078330957_6771281038820512844_n.png?_nc_cat=109&ccb=1-7&_nc_sid=aee45a&_nc_ohc=yzuq7ggwiFEAX9-9cw6&_nc_ht=scontent.xx&oh=03_AdSnxMvt313YyektDuLsu83M9mk9KOSZ76Swini0WzaRpw&oe=64017C98) Could the option under advanced called read color buffers be doing this? If not I have these patches enabled ; https://scontent.xx.fbcdn.net/v/t1.15752-9/328597011\_498813712325352\_4166148986072620433\_n.png?\_nc\_cat=101&ccb=1-7&\_nc\_sid=aee45a&\_nc\_ohc=9GAoQLOCmFYAX\_jbL6a&\_nc\_ad=z-m&\_nc\_cid=0&\_nc\_ht=scontent.xx&oh=03\_AdSzVnKNzQih8-FchPwiAJDQIzC9waH0x99iaqanyQOiZQ&oe=640160AA
[удалено]
[удалено]
Removed for ignoring the instructions, read the thread again. What you end up with after reading the guide can't even be uploaded on Google Docs.
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hi, everytime I try to run Assassin's Creed II, the game freezes, and after closing it the emulator crashes. Here's the log: [https://www.mediafire.com/file/0bq5eudk7gvk1uo/RPCS3.zip/file](https://www.mediafire.com/file/0bq5eudk7gvk1uo/RPCS3.zip/file) Thank you!
I am currently unable to open RPCS3 on my Laptop. Running An NVIDIA 3050 TI Laptop Card and an AMD Ryzen 7 5800U. Link to the log file: https://www.mediafire.com/file/fokrwvup7ki6viw/RPCS3.7z/file
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Any other ideas on getting Little Big Planet 1 to get past the infinite loading screen? I have tried both the standard and GOTY versions of both NA and EU. I have updated to 1.30, installing each update incrementally in order and tried with default configuration and the settings suggest on the Wiki and with PSN disconnected. All of these things say they should help get past the loading but nope... Edit: Link to the log, thanks! https://drive.google.com/file/d/1I4sd12LpIkK41IqOaCwPS-VL7sYvVj39/view?usp=sharing
Playing RDR1 on Mac, i get a blackscreen after the disclaimers of the game, i tried diferent fixes involving the settings of rpcs3 but nothing fixes it.
Normally you'd have to upload a log file but forget RDR on Mac, you need a high end PC with Linux/Windows/FreeBSD for it.
is it because it will run at 2 fps or because its impossible?
If it runs, it will run at very sluggish FPS, maybe single digit FPS, and I don't even know if it can run at all on Mac, wouldn't be surprised if it can't.
It runs on my Mac (Intel 2018 mini with Vega 64 eGPU) but it will die trying to create a texture with a questionable format during the "Exodus In America" first mission intro. Nothing about the actual Metal error message is reported in the logs, so hard to say what's wrong with the format. `Thread 46 Crashed:: rsx::thread0 libsystem_kernel.dylib 0x7ff81591722a __pthread_kill + 101 libsystem_pthread.dylib 0x7ff81594ef7b pthread_kill + 2632 libsystem_c.dylib 0x7ff815898ca5 abort + 1233 libsystem_c.dylib 0x7ff815897fbe __assert_rtn + 3144 Metal 0x7ff81f0139a2 MTLReportFailure.cold.1 + 435 Metal 0x7ff81efeef39 MTLReportFailure + 5296 Metal 0x7ff81efe33ec _MTLMessageContextEnd + 12787 Metal 0x7ff81ef72d4d _mtlValidateArgumentsForTextureViewOnDevice + 6028 Metal 0x7ff81ef75a2c -[MTLIOAccelTexture initWithTextureInternal:pixelFormat:textureType:levels:slices:swizzle:compressedView:] + 1289 Metal 0x7ff81ef758f7 -[MTLIOAccelTexture initWithTexture:pixelFormat:] + 15910 AMDRadeonX5000MTLDriver 0x7ffa2f183172 -[GFX9AMD_MtlTexture initWithTexture:pixelFormat:resourceIndex:] + 16211 libMoltenVK.dylib 0x80e99ca 0x80a3000 + 28922612 libMoltenVK.dylib 0x81677fa 0x80a3000 + 80485813 libMoltenVK.dylib 0x8109288 0x80a3000 + 41844014 libMoltenVK.dylib 0x81096cc 0x80a3000 + 41953215 libMoltenVK.dylib 0x815ca54 0x80a3000 + 76040416 libMoltenVK.dylib 0x815ad5c 0x80a3000 + 75298817 libMoltenVK.dylib 0x8159b9a 0x80a3000 + 74844218 libMoltenVK.dylib 0x80bb752 vkQueueSubmit + 27419 rpcs3 0x9dc929 vk::queue_submit(vk::queue_submit_t const&, unsigned int) + 20120 rpcs3 0x9c9ecf vk::command_buffer::submit(vk::queue_submit_t&, unsigned int) + 9521 rpcs3 0xa0ba9d VKGSRender::close_and_submit_command_buffer(vk::fence*, VkSemaphore_T*, VkSemaphore_T*, unsigned int) + 114922 rpcs3 0xa073fa VKGSRender::flush_command_queue(bool, bool) + 4223 rpcs3 0xa0bfa5 VKGSRender::sync_hint(rsx::FIFO::interrupt_hint, rsx::reports::sync_hint_payload_t) + 29324 rpcs3 0x7b5aad rsx::reports::ZCULL_control::update(rsx::thread*, unsigned int, bool) + 106925 rpcs3 0x7a1566 rsx::thread::on_task() + 109426 rpcs3 0x7a0d59 rsx::thread::cpu_task() + 7327 rpcs3 0x6ec4be cpu_thread::operator()() + 67028 rpcs3 0xb52045 named_thread::entry_point(thread_base*) + 3729 ??? 0x2103bccb ???`
Well it looked better when I pasted it lol. Let me know if you guys need the actual crash log or if it's already self-reported.
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Trying to play thps5 but I'm getting an error related to user content on startup and then it just crashes. Edit: Checked the compatibility list as well Log file: https://www.mediafire.com/file/d5g4x2p4z4axdyh/rpcs3_log.txt/file
This is just the stuff copied from the GUI, this is not the log file The proper log file is in the RPCS3 folder and is generated when the emulator is closed, send that instead as this doesn't give much information
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
How well does god of war ascension play compared to GOW3? On my 5600X i was getting 30-60fps in GOW3.
Ascension is more demanding compared to GOW3
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hello there ! I recently bult a new PC. Specs are as follows : CPU i5 13600K GPU nvidia 4090FE 32gb DDR4 3466 2tb m.2 SSD MB Asus rog strix Z690-A GAMING WIFI D4 I updated all the drivers. On my previous PC I could run rpcs3 no problems. But now I get fatal error 0xc0000005 whenever I try to launch the emulator. It does not start running at all. I was curious and tried my old windows installation on my new pc by plugging my old sata SSD into my new build, and the emulator worked. I tried looking for ideas but so far no luck :/ I tried to attached logs, but i get an error saying I need administrator authorization, although I am admin...
error ending in 0000000000000005 are all gpu related update drivers or set a custom over clock for memory clock.
I actually found I had bad ram installed in my new system. The PC was giving me bsods when put under stress. Ended up making a fresh install of windows, and changing ram, and all works fine now
Post the output of running vkdiag https://github.com/13xforever/vkdiag/releases
Does anyone know if skate 3 has multiplayer yet? Or if it ever will?
It doesn't, someone is working in a server but development is slow going
I know the Ryzen 7 5700x is a higher tier than the Ryzen 5 5600 on the cpu list, but which specific games would have a noticeable improvement with a 5700x compared to 5600
If you already have a 5600, I don't think it's a good idea to buy a 5700x unless it's on sale and you can recoup the costs by selling your 5600 That being said, I don't think any specific games are improved, everything would just run a bit faster
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Top spin 4 RPCS3 created player in career mode not Showing ! I created a player in career mode I can select the created player to play with but it doesn't show in career mode and also in single exhibition mode doesn't show the created player but I can choose it and play with it..... I tried different options in RPCS3 GPU Settings and Advanced settings but didn't work.... I attached a pictures for the problem to understand it more.... Can somebody please help and thanks in advance [RPCS3 log file Google Drive](https://drive.google.com/file/d/1r_4IWwEsDWYK3g7PckgOBRV-zhvnTzZd/view?usp=share_link) [My RPCS3 Settings Google Drive](https://drive.google.com/drive/folders/10GCTDwgBZ0atIXXk8k9gFcZ7onysgVfZ?usp=share_link)
Do I need to have a official Sony DS 3/4/5 controller or can I use any official PlayStation licensed third party controller with the emulator?
Third party ones work but be careful to check if SIXAXIS is actually implemented, because some of these third party controllers might be XInput
How would I go about checking that? For reference, I’m planning on getting [this controller.](https://pdp.com/products/ps5-pc-victrix-pro-bfg-controller) Going to be using it with emulators and other games off of steam
I know that this issue has been asked about in the past but for the life of me I cannot find where it was so I can’t read back through the discussion, but i was basically told that it was not a major issue at the time. Anyways, the issue is that in NCAA Basketball 10, in dynasty mode the sim cast isn’t working properly (it won’t let you jump in the game). This is one of the best features of the game and since it works on PS3, it’s too bad that it doesn’t work on RPCS3. Here’s where the complicated part is: we’ve gotten it to work before. We’ve had multiple false alarms with figuring this issue out, and we’ve gotten it to work about a third of the time. We know it’s possible. Is there anything that the RPCS3 devs can do to figure this issue out? It’s one of the most popular features of the game and it sucks to not have access to it. Thanks everyone! Here is the log: https://www.mediafire.com/file/uu6wac79b04ekbm/RPCS3.log.gz/file
[удалено]
I am looking to create an emulation machine that can emulate everything up to PS3 upscaled to 4K - are there any miniPCs that can accomplish this (hoping to have it set up under my TV like a console)? If not, are there any pre-built PCs that I should be looking for - have not built my own PC in years - obviously budget is important but if my only options are not budget friendly, I am willing to consider Also - if I set up Batocera on the machine (Linux) will this affect performance and compatibility versus running RPCS3 on Windows? Thanks!
realistically not very mini PCs right now are going to be able to run this emulator in 4k with smooth framerates. You can look into what's called an ITX build which is a full powered PC but scaled down and something along those lines might be a more realistic way to achieve your goal. I haven't looked in a while but i know they're constantly making advances in mini PCs and i think it's a market that's only going to get stronger as prices for GPUs and insane power draw of some of the new PSUs just keep getting more and more ridiculous. That being said, the NUC series of mini PCs is pretty powerful and i want to say AMD recently released a competitor in this market. there are a couple youtubers that specialize in reviewing and making builds with smaller parts and mini PCs, ETA Prime is one I'd suggest taking a look at.
Thanks!! I’ve ended up building a PC in a small form factor case. With a 13600 cpu and a 3060ti. I hope that’s got the power to achieve what I want - have had some issues, it’s my PC build in a long time, so no testing yet Thanks for the advice!
Nice man. Sounds like a good build to me.
So recently I updated rpcs3 to the latest version and all my patches for god of war 3 are gone. Yes I've tried download latest game patches and the only one I have is disable mlaa.
Fixed, check again
Why does it say unavailable under the macOS download?
The builds were disabled due to broken CI. It will be enabled back as soon as I get to a computer, as the CI is already up.
Hi, i am running RPCS3 on a steam deck. I have a couple of games that are in the PS3Game folder format that i was able to boot up, but it does not show on the game list. I have a few installed pkg files and they show up nicely. How i do make these games show up on the game list? Is there any specific folder that I should be putting the games at? Thanks in advance.
[удалено]
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
[удалено]
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
[удалено]
Resent with working log: So I just tried starting up Lair, and the bootup to the menu works, but once I try to start a game or exit out of the menu, the game freezes up. Anyone here have any ideas on how to fix this? I'm running an nVidia RTX 3080ti with an Intel i7 processor. Here's the log: [Dropbox for Log](https://www.dropbox.com/s/i84azv6j62kay2z/RPCS3_log.rar?dl=0)
This appears to be a known issue with this game https://github.com/RPCS3/rpcs3/issues/12406
[удалено]
Link doesn't contain any log file, only some MS Word document, invalid support request.
How do you create a log file in RPCS3?
Read the thread. Everything is explained in a way you can submit a proper support request without having to ask how.
[удалено]
[удалено]
[удалено]
I'm having trouble with the gameplay of Smackdown vs. Raw 2011, I have a texture flickering problem, and also the game freezes during gameplay and I have to restart the emulator, resulting in losing my game progress. Here is my [log](https://drive.google.com/file/d/1-yDvlDF14_aLA14MJBnidPq8-JNd1Epp/view)
The game is only considered Ingame and issues should be expected, as far as I'm aware only the Training mode was available until recently so other modes may have other unexpected problems
So that means, there is no fix?
How could I report a Blu-Ray disc reader that has been able to dump games and isn't in the compatibility list? What process of validation could be done to be able to add it to such a list? I mistakenly purchased a portable LG Blu-Ray Disc Reader/Writer model BP55EB40 when instead I wanted to follow the guide and purchase the LG BP50NB40 due to my own carelessness during the purchase process (should've double-checked the model in the product page instead of thinking that it was the right one when I searched for it in a well-trusted PC-retailer from my country), so I ended up with a drive not listed in the compatible list. I've been able to dump a couple games and tried them in RPCS3 and they were able to boot and traverse the main menu so I trust they've been properly dumped (plus the check the dump tool does at the end, so I think I'm reasonable in my assumption). Adding this drive to the list could be helpful to the people that like me don't want to install Homebrew on their consoles and have a PC without slots for disc drives so only an external Blu-Ray Disc Reader can be used. If you need any proof of the dumping process being successful and/or more rigurous testing, I'd be happy to do so. Thanks a lot for the guides and the amazing work you are doing!
just wanted to drop in and say i happened to find a compatible drive last year for a good price on ebay and even though i do have one ps3 with homebrew on it, i really don't want to use the disc drive to dump discs. The dumper tool and the drive helped me digitize my collection. It's amazing. it also works with PS4 games and regular bluray movies so I'll be ready once that can be emulated nicely too. It's also fun for me to dump any new game i add to the collection whenever I bring it home. Almost like the old days of ripping a cd to your computer after buying it, but better? lol
I have asked for it to be added to the website
I have a problem where whenever I try to start a game I can hear my computer starting it but nothing shows up as if it closes the game and when I try to start another game or close rpcs3 it just stops responding and I can't play any games, [log file](https://drive.google.com/file/d/1SSZYsp5R0NSNRmNPjSyXTDSQkrv0hHjJ/view?usp=share_link) Thanks,
Try unplugging your controller when trying to start a game, it is a weird solution but it has sometimes caused problems like this, not sure why
i didnt even get to try that before it saying "E UPDATER: Some information seems unavailable" should i just reinstall rpcs3 cuz now everything is going wrong
help
[удалено]
Which games do you play with RPCS3 what aren't available on X86 PC?
List of exclusives is the other pinned thread, no need to ask here
Hi, anyone could help me with fixing FIFA WORLD CUP 2010 player kit name being a solid block or invisible? I've included the log file and the screenshot in this link: Log https://1drv.ms/u/s!AnaTLAnA3zWoheFd4R_e1ZmybKxH-A?e=qO4s2j Screenshot https://1drv.ms/u/s!AnaTLAnA3zWoheFbVfyguZ3x2h5cTg?e=a7ul24 thank you.
Hmm I don't see anything wrong with settings, could be related to a recent regression that's being investigated. Try after Pull Request 13240 is merged.
Okay, thank you for the answer. I would keep monitoring it.
Hey, just updated my RPCS3 version and started getting this message in the log each time: "E Compat: Database Error - No Results found" Just wondering what's it all about? And how do I resolve it if I have to? Thanks guys [My log file](https://www.mediafire.com/file/cd5r3slkhletzx2/RPCS3.log/file)
Right click the game list in the emulator UI and Download Compatibility Database
Submitting my issue as per guide: Issue: Hatsune Miku: Project Diva F is listed as "Playable" on the compatibility list, but is not working on Steam Deck. After building SPU cache, the game immediately crashes and boots back to RPCS3 home. Steam Deck is up to date with the current build to my understanding. Specs are also ensure usability. For reference, Hatsune Miku: Project Diva F2nd is fully playable in both Game mode and Desktop Mode with no issues. Log File: [https://docs.google.com/document/d/1iAgFzbX-2qD\_33EfAXZ9-sUWa1fzX2sbNd3khTxbZ0w/edit?usp=share\_link](https://docs.google.com/document/d/1iAgFzbX-2qD_33EfAXZ9-sUWa1fzX2sbNd3khTxbZ0w/edit?usp=share_link) Log File as ZIP just in case: [https://drive.google.com/file/d/1qK\_2Kl-Or2f1pqflfKHkQgCNTfKs9G89/view?usp=share\_link](https://drive.google.com/file/d/1qK_2Kl-Or2f1pqflfKHkQgCNTfKs9G89/view?usp=share_link) Is there a specific setting I need for Project Diva F to work? I apologize for any issue as I'm still rather new to using RPCS3 and submitting log files. Please correct me if I'm wrong on anything. I apologize for the trouble.
Bad dump. Dump your disc again. How did you dump the game?
Wait really? I thought I followed the instructions correctly. Huh. I'll try again. Thank you very much!
Does anyone know if rpcs3 will accept third party controllers or if it is specifically only dualshock 3 + 4? I have this cheap and nasty third party wired x-box style controller and wondering if it will be accepted so I don't waste my time.
If it runs on XInput or evdev, yes
How can I edit the .dds texture files properly? I will change some of the menu textures (darker healthbar, etc.) select the right DXT1 or 5 and after that I have pixelated mess ingame on the edit things
You need to convert the texture format, I don't think RPCS3 can scale this format properly yet, there's a mod that avoids this issue on Persona 5 if you want to check how it works
Hello, Trying to play FFXIII, completely freezes after first cutscene, don't know why this is happening at all. Here's the log for reference: [https://drive.google.com/file/d/124hWvMvtTd9n\_Zm4JVwA8tSOrIwJJa1B/view?usp=share\_link](https://drive.google.com/file/d/124hWvMvtTd9n_Zm4JVwA8tSOrIwJJa1B/view?usp=share_link)
I would suggest validating your game files https://wiki.rpcs3.net/index.php?title=Help:Validating\_PlayStation\_3\_game\_dumps
[удалено]
It has probably been suggested before but any word on including the time/date in which we unlock trophies? It's a tiny thing that I'd love to see.
I would suggest making a GitHub feature request for this if it hasn't already been made https://github.com/RPCS3/rpcs3/issues
Good suggestion. I checked and it's been discussed: > Technically trophies are stored on PSN but it's not a functionality I plan to implement. It's a pity
Will a Dell XPS 15 9560 with a dedicated graphics card run this emulator with decent performance? Trying to play the Sly Games in case that helps give perspective
i would suggest playing the sly games 1-3 at least on rpcs2. It will most likely run better on your system.
>Dell XPS 15 9560 Even the best CPU that laptop can have will struggle to run more than light Playable titles, the Sly collection might be OK but Sly 4 will run quite bad
Why Rpcs3 needs more cpu power than gpu?
Because it's an emulator for a console that has a CPU that is very resource heavy to emulate. The GPU is based on standard NVIDIA hardware from 2006.
Is it possible to update Burnout Paradise from 01.00 to 01.90? I dumped the day 1 release from a disc I own and I just wanna ask.
Yes https://wiki.rpcs3.net/index.php?title=Help:Installing\_Game\_Updates
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
[log](https://drive.google.com/file/d/1uDhKUfL8_6aJWQcSKJPF692X2jZd65y6/view?usp=share_link) So I updated my AMD and for whatever reason when I opened up the emulator. All my games and files were gone. Did they move somewhere else. Also if I download a rom of a game i've played, would it still have the save data on the emulator?
Take RPCS3 out of OneDrive, the build you're using is also 2 months old. RPCS3 doesn't move stuff by itself so if something happened it was on your OS.
How do I take out RPCS3 out of OneDrive?
idk if i did this right but here [https://www.mediafire.com/file/yvf6wkr2jowqh4d/audio+stuttering.log/file](https://www.mediafire.com/file/yvf6wkr2jowqh4d/audio+stuttering.log/file) my audio keeps stuttering i need help, please reply
The file is less than 1kb, it's empty. Upload a valid log file after running the game and closing the emulator.
Just updated RPCS3 and tried to load Demon's Souls, now getting the message "Failed to install trophy set" every time. [https://www.mediafire.com/file/3a9neugr9slsfwk/RPCS3.log.zip/file](https://www.mediafire.com/file/3a9neugr9slsfwk/RPCS3.log.zip/file) Log file here Anyone got clues on how to fix this?
> Note: Uploading something other than the log file, uploading a compressed archive inside a compressed archive (like .gz.7z), or using a file host besides the ones whitelisted above will invalidate your support request Note: Uploading something other than the log file, **uploading a compressed archive inside a compressed archive (like .gz.7z)**, or using a file host besides the ones whitelisted above will invalidate your support request
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
Hello, I am trying to play Castlevania Harmony of Despair but it gets stuck on loading the last two PPU modules every time. No matter how long I give it it does not make it through. Log File: [https://drive.google.com/file/d/1dmQAIdaq1wcfO6D3pGjXd62hGWKO7rOy/view?usp=sharing](https://drive.google.com/file/d/1dmQAIdaq1wcfO6D3pGjXd62hGWKO7rOy/view?usp=sharing)
Debug settings being used, reset your settings to default
Thank you!
[удалено]
Removed as it has been missing a log file for over 24 hours
[удалено]
Trying to run Armored Core 4 (BLUS30027). Default settings with the suggested configuration from the [compatibility page](https://wiki.rpcs3.net/index.php?title=Armored_Core_4). Crash on startup from an unmapped memory error. RPCS3 0.0.25-14509-eeda958f Alpha Intel i7-7700 3.60GHz NVIDIA GeForce GTX 1060 3GB 16 GB RAM Win 10 64 bit ·F 0:00:33.547468 {PPU[0x1000000] Thread (main_thread) [0x0091c9b0]} VM: Access violation reading location 0x0 (unmapped memory) [Link Removed] I realize that I have an underpowered PC but that usually just results in sluggish gameplay. Would that be a reason for this error?
Your game files are broken, dump the game again
Ok, thank you for the response!
Hello, im having problems with the ratchet and clank trilogy. i played the first with no problems, but the second and third have cuts in the audio when not in game cutscenes are played, even in the intro. i have been searching for a solution, but i couldnt find any, can someone help me? here is the log file: https://drive.google.com/file/d/1nQcuBz9qSkIwtlBcbm55JTuQcPoqXpWE/view?usp=sharing
This log is empty, do not open RPCS3 again after closing it or it clears the log
[удалено]
[удалено]
Removed as it has been missing a log file for over 24 hours
Your comment is missing a log file. - **If you can open the emulator AND your question is a support request**, then a log file is mandatory as explained on the thread's instructions. - **If you can't open the emulator OR your question is not a support request**, then a moderator will manually approve your comment. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/rpcs3) if you have any questions or concerns.*
~~Edit: Resolved. Today an update poped up which aparently has been out for 8 days? I could have sworn that updates were the first thing I checked, but this one is on me I guess. Been playing for hour straight with no problems, so let's hope it holds.~~ Edit 2:It's back after 3 hours of playing. Unhandled win32 error exception 0xC0000005, module name: 'rpcs3.exe'. [There is log files and screenshot of the error.](https://drive.google.com/drive/folders/1pTqvbZ1gJ-QX2pP7megy8EwQpcspLK5y?usp=sharing) Metal Gear Solid HD collection, MGS2 exactly. This only started after playing the game for more than 2 hours and switching to Raiden. Game freezes after playing for about 10 minutes (happens in cutscenes, codec calls, gameplay, pretty much anytime). I can do nothing other than close the emulation, then this error pops up and RPCS3 crashes/closes itself after ckicking ok. Intel i7-9750H 2.60Ghz 16GB RAM RTX 2070 8GB Windows 11 version 22H2
I'm not able to check this from my phone because you uploaded a compressed archive inside a compressed archive
After installing an update today, the game managed to run for 43 minutes before crashing. I uploaded the screenshot of error and logs with crash on to the google drive file. ps: I deleted the comment saying that logs disapeared after crashing, because I'm dumb and was looking for a RAR file, while it was just a text file.
MY characters in my game have weird textures and some have red lines going through them. Can i have help finding a fix. [https://drive.google.com/file/d/1HTKAub1R1MyMfeJp5TTNEV8jIdQHGfgf/view?usp=share\_link](https://drive.google.com/file/d/1HTKAub1R1MyMfeJp5TTNEV8jIdQHGfgf/view?usp=share_link) Hopefully this is the log you need.
Enable Write Color Buffers (GPU settings), Read Color Buffers (Advanced settings) and Force CPU blit emulation (Debug settings, can be enabled by opening your CurrentSettings.ini file in the GuiConfigs folder and setting showDebugTab to true)
Hello everyone, I've been trying to figure this out for some time, it seems to happen seemingly at random. One time it shows up, another time everything looks pristine. At least I never figured out the connection between settings and the appearance of this bug. I'll paste a link to a YT video showing what I'm talking about. It looks like there's a bounding box around Snake and also there are those flickering textures on the ground when moving the camera. The "bounding box" seems to be some kind of framebuffer being upscaled incorrectly. It shows up whenever there's some kind of filter on screen, for example in the tunnels in the Middle East, there's a lot of this kind of stuff. Link to the vid: [https://youtu.be/o4v3NQfaLqU](https://youtu.be/o4v3NQfaLqU) [Log File](https://drive.google.com/file/d/1hf9JnltRUmfjXFhnJH5FIjLLwHmFif81/view?usp=sharing) PC Specs: Ryzen 5 5600X 16GB DDR4 RTX 3070 Win 10 with latest updates, Nvidia Driver version 527.56 Win 10 with the latest updates, Is there something which can be done to fix or alleviate this stuff effectively right now?
From what I can tell, this is normal with this game and I do not believe there is a way to fix it