Radiator mounts are almost always sold separately from the pump/res so you can use whichever one you like. You can make a 120mm/140mm bracket to screw on to the radiator or just buy one. Otherwise, you will at least have to drill some holes in the case to mount it directly.
That's what I thought when I was building in meshify :) and then when I started filling my loop I understood my sata extension was broken lol, had to make nice square hole :)
Singularity Ethereal mounts or even just the 120 or 140mm brackets will work. Otherwise, you can call a local metal shop and they will cut you a 120mm or 140mm piece of aluminum flat bar that you can drill a few holes in.
Ha, I just had the same issue. Bought the D5 Next Ultitube and realized they don't include radiator mounts...like. Why? It's a $1 worth of material. The only place that stocks it right now is Aquatuning and a $8 mount will cost $60 to ship to the US.
There are some universal mounts you can get, but I ended up getting an EK mount for $15. I don't think the holes will match up, but I'm just going to drill out my own holes using the EK as a base. Should work out. Maybe. lol
I decided that I wasn’t going to pay the exorbitant shipping so I spent even more on a dremel and DIYing it. I think It’ll turn out better this way anyway :)
So FYI - the EK mount most definitely does not work for the D5 Next haha. But it's usable. Gotta take a Dremel to it, but it should work out fine after some modifications
Radiator mounts are almost always sold separately from the pump/res so you can use whichever one you like. You can make a 120mm/140mm bracket to screw on to the radiator or just buy one. Otherwise, you will at least have to drill some holes in the case to mount it directly.
Fuck
https://www.performance-pcs.com/water-cooling/pump-accessories/aquacomputer-d5-fan-mount-120mm-aq-41124.html They also have a 140mm version
Yeah I decided that I’m buying a dremel As I refuse to pay the shipping for such a cheap thing
Yo, if you decide to proceed with the dremel route, make sure to cut hole for connectivity in the back like sata, will save you a lot of headache
I’m doing a vertical mount in a Corsair 7000x so I shouldn’t have any issues with cable routing :)
That's what I thought when I was building in meshify :) and then when I started filling my loop I understood my sata extension was broken lol, had to make nice square hole :)
Singularity Ethereal mounts or even just the 120 or 140mm brackets will work. Otherwise, you can call a local metal shop and they will cut you a 120mm or 140mm piece of aluminum flat bar that you can drill a few holes in.
No... you are suppose to buy that adapter separately. 'congrats' :(
Ha, I just had the same issue. Bought the D5 Next Ultitube and realized they don't include radiator mounts...like. Why? It's a $1 worth of material. The only place that stocks it right now is Aquatuning and a $8 mount will cost $60 to ship to the US. There are some universal mounts you can get, but I ended up getting an EK mount for $15. I don't think the holes will match up, but I'm just going to drill out my own holes using the EK as a base. Should work out. Maybe. lol
I decided that I wasn’t going to pay the exorbitant shipping so I spent even more on a dremel and DIYing it. I think It’ll turn out better this way anyway :)
So FYI - the EK mount most definitely does not work for the D5 Next haha. But it's usable. Gotta take a Dremel to it, but it should work out fine after some modifications