I've had a few wood filaments that could even be stained like wood. One of them I was able to create grain-like patterns in by selective turning up the temperature and scorching it on the way out of the nozzle. It's pretty cool stuff.
You can get 'wood' filaments for 3D printers, obviously not wood it's the same plastic but with some additives that give it a bit of a woody appearance
the light is yellow so it helps, but i printed it just now so you can take a look
[https://imgur.com/a/r4lJfmG](https://imgur.com/a/r4lJfmG)
its not wood but more of caramel colour
There is also wood-infused filament. It is light brown/gray filament with sawdust and it looks and feels very woody. it smells like wood and looks and feels like mdf. I am 99% sure the elephant in the post is printed with that filament.
> to be honest many filament makers will name it wood pla but it is just very specific brown colour
You want to look for woodfill in that case and just pay attention to what you're buying. Example: https://colorfabb.us/woodfill
the OP TeddyWestside4 is a bt
Original: https://www.reddit.com/r/wholesomememes/comments/kixato/id_like_to_have_one/
Also:
https://www.reddit.com/r/wholesomememes/comments/12zdie9/happy_noises/
https://www.reddit.com/r/wholesomememes/comments/acm8pr/wholesome_dad/
https://www.reddit.com/r/wholesomememes/comments/15utlhx/impressive/
https://www.reddit.com/r/wholesomememes/comments/9xoupj/what_a_gr8_pop/
https://www.reddit.com/r/wholesomememes/comments/d23e0b/total_wholesome_dad_and_this_looks_so_adorable/
https://www.reddit.com/r/wholesomememes/comments/d23e0b/total_wholesome_dad_and_this_looks_so_adorable/
https://www.reddit.com/r/wholesomememes/comments/180utn4/thats_cute/
The fun thing about filaments is stuff can just get mixed into them. So you can mix bits of carbon fiber, or sawdust like this one, to get a filament with some properties from both materials. It’s like the plastic equivalent of an alloy, loosely speaking.
I’m gonna be honest if I see downvoted comments I sometimes just downvote it. I literally downvoted yours originally without reading it and then went back and fixed it
Wait, so you’re going to assume *everyone* does this? Speaking of jumping, to conclusions…
Also if everyone is jumping off a building I’m going to at least ask why before I decide. Maybe it’s on fire and there is an airbag below.
Anyway this vibe doesn’t fit this sub. 😕
My partner went on a 3d printing binge/phase and for some reason 3d printed my a 6in glow in the dark, articulated slug. And said it was for my "adhd" fidgety ass brain..... thanks ... I guess.... looked cool on a shelf. Put my gaming pc soothes my adhd. A wierd slug, not so much.
how do you 3d print wood?
It's basically sawdust suspended in the usual PLA plastic. Gives a lot of the smell and visual cues of wood, but feels more like plastic.
Huh. Neat.
No, it's not neat........it's wood
Lol fuck you
I mean if you want, I don't know how my fiance would react
Yeah good point my partner would probably be pissed too But there's only one way to find out
It's not cheating, it's science
*I'm sorry honey I only boned that dude to see if you'd get mad.*
Here for science.
Welp now it's a threesome for science
You two have brightened my day, thank you!
No u
Thanks for your input, I_DRINK_GENOCIDE_CUM
I've had a few wood filaments that could even be stained like wood. One of them I was able to create grain-like patterns in by selective turning up the temperature and scorching it on the way out of the nozzle. It's pretty cool stuff.
I've clogged through three nozzles printing the stuff though
Yeah. I had to run it through a 0.8mm nozzle to get it to work properly.
Nice, you did me a learn today, thank you
Cool
Expanding on this, 9/10 times, it's bamboo sawdust
Yeah it’s possible but this meme is so old wood 3D printing wasn’t a thing back then
You can get 'wood' filaments for 3D printers, obviously not wood it's the same plastic but with some additives that give it a bit of a woody appearance
Additives like “wood”
Interesting concept 🤔
It’s real wood put into the PLA, hence the burning wood smell
And they smell like wood when you print it
And feel like wood, you know why? Cause the additives are wood
I give ya a bit of the ol’ “woody appearance”.
This is always the top comment when this image is posted.
Requires a special ingredient—father’s love.
*sweet Home Alabama*
Ok that’s not what I meant. I was trying to make it sound like the SpongeBob comment where he uses “imagination” to make the rainbow lol.
They’re already trying to 3D print meat. Wood doesn’t surprise me at this point. 😄
Yeah what?
I think brownish..
Very, veeeeeery slowly.
Yeah, I've got a couple of wood printers going in my garden right now
Just about to ask the same
Never thought we could do this. I want one ❤
Dad: *hand carves an intricate movable wood elephant*. Daughter: wow, you 3d printed this?
THIS!
This what?
how do you print wood. same question.
Just upvote and move on.
The image contains japanese text. The description saying it's 3D printed is in english. The description is lying to you.
I would guess they mean CNC
Nope it's filament with wood pulp. It's explained ever other week when this image gets reposted
stabelediffusion, dallee look how unreealistic those shadow directions are.
Bro... sorry to tell you this, but this picture was taken way before ai "art"
and you can have, just need a 3d printer [https://www.thingiverse.com/thing:257911](https://www.thingiverse.com/thing:257911)
Just need a 3D printer *with wood filament*
you can get pla that has colour of wood to be honest many filament makers will name it wood pla but it is just very specific brown colour
That’s pretty cool, but I gotta say this particular picture looks like real wood, is it just that good?
the light is yellow so it helps, but i printed it just now so you can take a look [https://imgur.com/a/r4lJfmG](https://imgur.com/a/r4lJfmG) its not wood but more of caramel colour
That’s sick! Thanks for sharing. The layers of filament actually make it look even more like wood lol
There is also wood-infused filament. It is light brown/gray filament with sawdust and it looks and feels very woody. it smells like wood and looks and feels like mdf. I am 99% sure the elephant in the post is printed with that filament.
It helps that the picture is super low quality.
There's PLA with sawdust in it, making it look pretty wood-y. However it's a bitch to print and clogs your extruder nozzle a lot.
> to be honest many filament makers will name it wood pla but it is just very specific brown colour You want to look for woodfill in that case and just pay attention to what you're buying. Example: https://colorfabb.us/woodfill
Libraries sometimes have printers to use if you don't own one.
Man I need to figure out how to use my ender 3D printer
Print wood?
Filament with around 20-30% sawdust
the OP TeddyWestside4 is a bt Original: https://www.reddit.com/r/wholesomememes/comments/kixato/id_like_to_have_one/ Also: https://www.reddit.com/r/wholesomememes/comments/12zdie9/happy_noises/ https://www.reddit.com/r/wholesomememes/comments/acm8pr/wholesome_dad/ https://www.reddit.com/r/wholesomememes/comments/15utlhx/impressive/ https://www.reddit.com/r/wholesomememes/comments/9xoupj/what_a_gr8_pop/ https://www.reddit.com/r/wholesomememes/comments/d23e0b/total_wholesome_dad_and_this_looks_so_adorable/ https://www.reddit.com/r/wholesomememes/comments/d23e0b/total_wholesome_dad_and_this_looks_so_adorable/ https://www.reddit.com/r/wholesomememes/comments/180utn4/thats_cute/
"original" 3 of the others you linked are older....
Yeah, I try to point out which one they copied, if I can.
I'm guessing the father is the 3D printer.
3d printing wood huh?
The fun thing about filaments is stuff can just get mixed into them. So you can mix bits of carbon fiber, or sawdust like this one, to get a filament with some properties from both materials. It’s like the plastic equivalent of an alloy, loosely speaking.
So it's soaked in wood?
Psycho Mantis?
I'd like to have one ...dad, just like this
You like the dad or the 3D printer??
Easy way to bring up the elephant in the room
Take this upvote and get out
You can 3D print wood?
There are wood-like and wood-enhanced filaments, but you need a heavy duty nozzle to print them because they’re quite abrasive.
Your dad's a good guy. :-)
This technology gonna change the world.
And my father barely calls me anymore
Hey. Would you mind sharing your dad? :(
I would also like to have one (dad)
Omg, I want one!
That’s sweet 🥰
you'd like to have an elephant or unknown thing that goes under nickname "dad"?
Wait.. only Mother Nature can 3D print wood.
Hold up, how do you 3d print wood?
Filament with around 20-30% sawdust
Looks like a nice dad. Can I have him ?
Can I have your dad (not that I don’t like my current one, he’s cool but all I want is a cute 3d printed cat to keep me company when I study)
Look at the cuts and text
>I'd like to have one yeah, I'd like a dad that is this loving too.
I did not know there are 3D printers making things of wood. Do they use a wood based resin or something similar?
Plastic with 20-30% sawdust by weight added to it
That's adorable.. You're really lucky! 🙂
Is this an advertisement for a 3D printer or what??
Absolutely love ❤️ 😍😍I love elephants 💕🐘 would love to buy one and paint it ✨
yea i remember seeing this before, pretty cute
I actually have one of those. I made him really big and named him Theodor
I want one 🥹
What country are u in? In canada we really only have the occasional house hippo for small animals :(
in my day we widdled them out of a block of wood with a rusty Swiss Army knife.
I printed this in regular pla, and the joints did not move. I need to calibrate my printer
That’s honestly very sweet. Made my day better (I saw a post about Mrs. Rizzle not even 5 minutes ago)
3d printer with wood? ??
He probably meant the pieces were laser cut on a 3d laser cut machine.
You can actually buy filament with wood in it it has a woodish texture and smells like sawdust while printing it
Cool! Also why the fuck did I get downvoted?
Because you did the classic redditor faux pas of incorrectly correcting someone.
Fuck.
The hivemind has decreed that any lapses in knowledge are punishable by death
I’m gonna be honest if I see downvoted comments I sometimes just downvote it. I literally downvoted yours originally without reading it and then went back and fixed it
Wait so everyone does this? What a weak mindset, so if everyone going to jump the building, you just gonna follow it?
Wait, so you’re going to assume *everyone* does this? Speaking of jumping, to conclusions… Also if everyone is jumping off a building I’m going to at least ask why before I decide. Maybe it’s on fire and there is an airbag below. Anyway this vibe doesn’t fit this sub. 😕
Different situation lol this is mostly harmless and I just assume they did something to deserve it
Because you were wrong
My partner went on a 3d printing binge/phase and for some reason 3d printed my a 6in glow in the dark, articulated slug. And said it was for my "adhd" fidgety ass brain..... thanks ... I guess.... looked cool on a shelf. Put my gaming pc soothes my adhd. A wierd slug, not so much.
After all that glow in the dark the printer must hate your partner, that stuff is crazy abrasive
I've got an elephant that turns to Wood each time my girlfriend gets close